0
What else can I help you with?
How many gallons of water could be in an acre?
1 acre = 43560 sq.feet. 1 foot deep water over an acre is 43560 cubic feet, which is 325851.4 gallons in 1 foot deep. If it is 1 inch deep (1/12 foot) then it is 27154.3 gallons in 1 inch deep.
How much rain is 1 inch over 1 acre?
1 acre = 43,560 square feet1 inch = 1/12 footVolume = 43,560 x 1/12 = 3,630 cubic feet = 27,154.3 gallons (rounded)
What is the Weight of one inch of water over one acre?
AnswerAn acre is 43,560 sq. ft. x 12 = 522,720 sq. in. At a depth of one inch, it's the same number of cubic inches.Water weighs 0.036127 lb/cu.in.43560*12*.036127= 18,884.30544 pounds, or 9.44215272 tonsThis is totally wrong. There is not 12 inches per square foot! There is 144 square iches in a square foot!43560*144 = 6,272,640 square inches per acre!6,272,640 cu. in. * 0.036127 lbs/cu. in. = 226611.7 lbs or 113.3 tons per inch or water on a acre!
How much of an acre is 0.35?
It is 35% of an acre. Or a bit over one third of an acre.
How much of an acre in 17500.00 square ft?
0.40174471996624744 acre so a tiny bit over 2/5ths of an acre.
How much of an acre is 94'x133' ft?
0.287 acres or just over a quarter of an acre
100x25feet is how much of an acre?
100x25 feet is 2500 square feet, which is 0.05739 acre. Just a bit over 1/20th of an acre.
One inch of rain equals how many gallons of water over 100 acres of land?
One inch of rain over 100 acres of land would equal about 27.1 million gallons of water. This calculation is found by multiplying the acreage (100 acres) by the volume of water in one inch of rain (27,154 gallons per acre-inch).
How much water causes hydroplaning?
A car traveling over 45 mph can hydroplane with about 1/10th of an inch of water on the road.
How much water can cause hydroplaning?
A car traveling over 45 mph can hydroplane with about 1/10th of an inch of water on the road.
How many gallons is 1 inch of rain to a acre?
Well, you know there are 43,560 square feet in an acre, and you know there are 12 inches to a foot. The next clue you need is a conversion factor from volume in gallons to the units of area, which in this case is inches; so, there are 231 cubic inches to a gallon. You now have all the information you need to algebraically determine the number of gallons in an acre inch.
How much 2 inch pipe will hold a gallon of water?
A two inch pipe can hold 0.1632 gallons per foot. It takes slightly over 6 feet of two inch pipe to hold one gallon of water.
