0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many liters are in a bath?
200 to 500,
How many pints fill a bath?
Average UK bath tub size between 125 and 130 pints to fill a bath.
How many cups of water can fulfill a bathtub?
It depends how big it is and how deep you fill it.A:Get a bucket that you know the size of (normal buckets hold up to 4.5 gallons (18 liters)). Next time you fill the bath, fill it bucket by bucket. Then you will know how much water you have used. You can measure the shower in a slightly different way. Count how many seconds it takes to fill the bucket. Then time your normal shower. If it takes 60 seconds to fill a 5 gallon bucket and you take a 4 minute shower, you will use 20 gallons of water for your shower. That's a lot of water!A:According to the BBC Website, a bath can hold 80 litres of water. A:How many gal tub is it!Or what size in inches is it,Length 3-1/2' ?wide 2' ?water depth 1' ?If so then some where < then 50 US galA:Apparently, when comparing a bath to a shower, a bath is much more wasteful. To try it out, plug the drain and run the bathwater for 10 minutes (enjoy the bath). Next time you have a shower plug the tub and see how much is in the bottom after 10 minutes. A:The dimensions of a standard size bathtub are approximately: two feet wide, four and one-half feet long, and one foot deep. Simply multiply as follows to find the tub's volume in cubic feet: 2 x 4.5 x 1 = 9 cubic feet.Now one (1) cubic foot of space will hold 7.48051945 gallons of any liquid, so to find the tub's volume in gallons, one must simply multiply this decimal by its volume in cubic feet.The answer is as follows:9 x 7.48051945 = 67.3 (rounded to the nearest tenth)Therefore, a bathtub with the dimensions described above will hold about sixty-seven gallons of water when completely full.A:35 to 40 gallons for typical tub A:The average bathtub will hold 40 to 60 gallons when completely filled. A:Depends on how big the bathtub is but average bathtub size is about 80 liters A:Typically data on water conservation use a bathtub volume of 25 to 340 gallons for comparison with showers. Larger jetted tubs (whirlpools, jacuzzis, etc.) exist but these would be special cases.
What size wire should be used to connect a water heater from the panel?
The wire size is dependent upon the wattage size of your water heater. The higher the wattage the larger the wire size. A standard 3000 watt heater will use a two pole 20 amp breaker connected to 2C #12 wire.
Why doesn't starch dissolve in water?
if we dissolve a starch in water it forms a colloidal solution and the particle size is much larger to completely dissolve in water
How much water does a bath tub?
It depends what size it is.
What is standard size of bath tub?
The standard tub in North America is 30x60 inches. -
What is standard size for bathroom en suite?
6'*10' for bath & suit
How many Gallons water per bath?
Depends On The Size Of The Bath probley about 6
How much water does a bathtub hold in liters?
There are many different sizes of bath. A common size of bath might hold 350L, but baths can vary from 200L to 1000L or more.
How many gallons of water in a half full bath tube?
depends on the size of the bath tub
How much water is in a can of pepsi?
The standard size of a soda can is 12 U.S. fl oz.
About how much water does a bucket hold?
It depends on the bucket size, but usually a standard size bucket would hold a few litters of water.
What consume more water shower or bucket bath?
A long shower will take more water than a bath, but a bath will usually use more water than a short shower.
How much does a glass of water with 20 percent sugar weigh?
The answer depends on how large the glass is: there is no standard size.
How do you Covert a full bottle of water into grams and kilograms?
A bottle is not a standard size so it is not possible to say how much water it will hold.
How many buckets of water does it take to fill a bath?
it depends on the size
