Depends on the rate of flow and the size of the water outlet.
How much water? What is the gas used?
The shank on a sewing machine is the distance between the bottom of the preser foot and the screw that holds the presser foot in place. This applies to older sewing machines (usually pre-1980), as newer machines have a presser foot that snaps on, as opposed to screws on. --A high shank machine measures approximately 1 1/4" from the presser foot screw to the bottom of the foot, and uses High Shank presser feet --A low shank machine measures approximately 3/4" from the presser foot screw to the bottom of the foot, and uses Low Shank presser feet
Eight (8.02083) cubic feet per 60 US gallons of water.
Giraffes never get eight feet. Octopusses are born with eight feet but giraffes? don't be silly! Giraffes never get eight feet. Octopusses are born with eight feet but giraffes? don't be silly!
There are different types of attachments, so I recommend checking your manual for the best ways to attach them. A common attachment is a presser foot. The different type of presser feet attach to a small, horizontal bar which is behind and below the needle.
There are 26.25 feet in 8 meters.
Eight meters = about 26.2 feet.
Eight feet by eight feet (8' X 8') is a square area. The answer is 64 square feet.But eight times eight feet is 64 (linear) feet, because 8x8=64.
Linear feet is the length. An eight foot long rope has eight linear feet.
Eight feet is greater.
Eight feet.
The question can't be answered because there was no specification as to what the question is asking about. But these are my answers: If you are human, with the right Scuba gear and practices, you can dive to the most 1000 feet, other than that, you'll die. If it's a submarine, the deepest is at 3000 feet, other than that, the submarine will start to get crushed. I hope this answers your question.