Near to 400 pounds.
One pound of steam requires the input of 1080 btus of heat added to 32oF water at atmospheric pressure. One ton or 2000 pounds requires the input of 2.16 million btus, and a boiler with 80% efficiency (common value) will need 2.7 million btus of heat from the combustion of the wood. Assuming the wood has a btu heat content of 6500 btu/lb (commonly most woods are 6000 to 7000 btu/lb) then about 415 pounds of wood are required to produce 1 ton of steam. In practice only 375 pounds of wood are needed to maintain a steady output of one ton of steam in a boiler, as the water when reintroduced into the boiler is very close to the steaming temperature and doesn't need to be heated from 32oF.
Yes. A steam engine can be used to generate electricity. Obviously, you can boil water with wood. Although, The Navy prefers to use Nuclear Power.
Biofuels are biomass( fuels) that generate energy from wood burning. They contribute to sustainability by producing steam for both heating and electricity.
It is not safe to use steam on wood furniture. The steam could stain the wood.
No, you cannot clean wood floors with a steam mop. The steam will cause the wood to bubble and will get a mould underneath it.
# Bury the garbage. Let it decompose. It will generate methane gas. Capture the methane and use it to run an engine or gas turbine. Use the engine or turbine to turn the generator. # If the garbage is wood, grass, or other material that can be burned, then burn it. Use the heat to boil water into steam in a boiler. Use the steam to turn a steam turbine. Use the steam turbine to turn the generator. Both of these methods (and there are more) are already used world-wide to generate power.
No, wood floors should have no steam products used on it. These will cause damage to the floor even if they are polyurethaned.
wood generates heat and it has for many years. It can be burned to create heat.
No only make fires
cart+steam engine
They were powered by steam locomotives. The steam was produced by burning wood or coal.
highly NOT recommended to steam clean any wood or laminate floors
It depends on how you bend the wood. For example, if you steam it, it is reversible. But if you cut notches, it is not reversible.