Needs a Topic
How must the forks be positioned when lifting stillages?
We need you to answer this question!
If you know the answer to this question, please register to join our limited beta program and start the conversation right now!
Asked in Food Safety
Safe lifting and handling thecniques that you must follow?
Asked in Forklifts, How To
How-to pick up a counterbalance forklift with a counterbalance forklift?
In order to lift a counterbalance lift truck you need to appreciate weight, load centres and centre of gravity position. The centre of gravity of an unladen counterbalance truck sits at a point directly below the operators seat. This point must align with the centre of the lifting truck or the machine may tip sideways off the forks. The forks should be positioned as wide as practicably possible to reduce the risk of sideways slipping. A forklift weighs a lot more than is initially apparent. A 2.5t truck typically weighs 4.25t so a 5t truck will be needed to lift it. Consideration also needs to be given to the load centre. A 2.5t lift truck is typically about 1200mm wide giving it a load centre of 600mm. Given a small undercut to avoid damaging the truck a load centre of 700mm would increase the weight by about 400-500kgs. Also be aware that electric trucks for example may have motors / gearboxes that extend below the bottom of the truck. Carelessly positioned forks can potentially cause costly damage. Good luck, Alba Forklift Training
Asked in Alternators, Lincoln Town Car
How do you remove alternator from 2003 Lincoln aviator?
Asked in The Twilight Saga
What is the the setting that effects the plot in twilight?
Asked in California
How many forks are in California?
I used to live in the great state of California, and I noticed that people often ate with forks. In fact, I very seldom saw anyone eating with their fingers instead of forks or other flatware. And since there are in excess of 30 million people in California, I would estimate that there must be well over a hundred million forks in that state. If we include plastic forks as well as metal ones, there are several hundred million, even a billion would be possible. Not that anyone is going to actually count them.
Asked in Airplanes and Aircraft
While in the immediate vicinity of an aircraft what must be present before a vehicle may be backed towards an aircraft?
Asked in Buick Electra
Can 22 inch rims fit on a 78 Buick Electra without lifting?
Asked in Jobs
Safe lifting of a load by a crane having ensured that the crane has been correctly selected and positioned for the job?
The safe lifting load of any crane that has been properly installed and maintained is determined by the engineering spec. a Crane is designed from the beginning to lift a load by transferring that load through the supporting structure to the ground or/ to the floating vessels structure in the case of a floating crane. All cranes are required to be marked for max capacity, and if it is not marked, get the serial number and contact the manufacture. If no information is available a certified PE must calculate the load limit.
Asked in Suzuki
How much oil in a suzuki gs 750 fork leg?
229 millimeters (9.0 in)- cap off top of forks and springs taken out,fully compress fork for measurement. Fork must be in vertical position for measurement. 229 millimeters (9.0 in)- cap off top of forks and springs taken out,fully compress fork for measurement. Fork (must) be in vertical position for measurement.
Do feather beds help with a bad back?
Asked in Hobbies & Collectibles
What size is the clamp on slamm rage2?
The clamp is an oversized triple clamp which comes in a variety of colours the clamp is really good on gripping the bars to the forks. The forks are slamm own make aluminium threaded scooter forks. The bearings are crap would like to tell you to replace them with grit or MGP bearings as they are good at gliding the bars on a spin. The clamp is a very good clamp must say would not replace as really good.
Asked in Honda, Honda Motorcycles, Fork Oil
How much oil in Honda forks?
It depends on the make of the bike, its type and model/year. In small bikes there can be as little oil in the front forks as 1/4 of a quart or liter, in bigger bikes the amount may be haf a quaet or liter or more. The problem with adding oil to front forks is that bigger bikes need to be jacked or lifted up at the front to fully extend the springs inside so that enough space is made for the new fork oil. The bolts on top of the front forks have to be removed with a wrench and then the oil is poured into the hole. Use a funnel to prevent spillage. If your front forks are leaking the oil you must get new front fork seals. Select thin oil for the forks, 5 W, 10 W or 15 W at the most.
Asked in Harry Potter
Why do people like Harry Potter when it's clear that all of his friends and family do the heavy lifting?
Where must the forks be placed when picking up a pallet load?
Asked in Rugby, Rugby League, Rugby Union
When was lifting allowed in Rugby lineouts?
Reference to Lifting as a technique in the line out was written to the laws in the 2009 edition of IRB Regulation 19. Law 19 states Lifting and supporting. Players may assist a team-mate in jumping for the ball by lifting and supporting that player providing that the lifting and/or supporting players do not support the jumping team-mate below the shorts from behind or below the thighs from the front. In the 2008 edition of the same law stated that; Support of a player. A player must not support a jumping team mate below the shorts from behind or below the thighs from the front. Penalty: Penalty Kick on the 15 metre line.