Refer to your owners manual.
a syncro is in the gearbox, it allows it binds up with a gear to allow the gearbox speed to become the same and the gear change to be smoothe
To change the gearbox oil, use a jack to lift the car and get underneath it. There is a duct under the gearbox that can be opened using a spanner. This will let the oil flow out. Close the cap again and refill oil from the oil cap which is located in the hood of the car.
No big job mate. Gearbox to be removed. The last car to change a clutch without moving the gearbox was a Vauxhall Cavalier 1998/99.
A gearbox is another name for a transmission.
You have to remove the engine and gearbox. you will need a engine crane. Once you have the engine and box out, remove gearbox from engine and replace clutch, Refit gearbox to engine, put engine and gearbox back in car. Easy job if you have access to a engine crane.
1. It is called TIPtronic gearbox. 2. It is a combination between semi-automatic and automatic gearbox. 3. You have an option to change the gears with a lever on the steering wheel or with the gear lever (like semi-automatic gearbox) 4.It is called tiptronic, because you pull or push the tip of the lever in order to change gear
HGJH
beacause the smart car are smart
Gearbox
Gearbox software can be found at Sony. Gearbox parts for cars can be found at your car dealership. Make sure you know what kind of gearbox you are looking for.
Depends on the car, and what you mean by "gearbox". O-rings are used as seals to keep fluids inside of places they are supposed to be.
Begin by changing the complete engine, fuel delivery/management system and probably the gearbox as well. Basically don't bother - change the car.