Want this question answered?
if it`s the front abs sensor you will need to buy the hub bearing,as this is all one unit.
To test an abs sensor for a Lexus ES you will need to use a multimeter. The multimeter will determine if the abs sensor works or not.
Need to change the whole bearing...
Find the ABS wheel sensor. Loosen the bolts that attach it to the suspension. Remove the bolts that hold the sensor to the wiring. Remove all other bolts. Remove the ABS sensor.
No, the abs is separate from the diagnostic plug fuse. If a sensor has failed, it will need replaced.
It means that there is a problem with the ABS system and you need to get it serviced.
Yes, but your ABS will not function if you should need it.
To change the ABS sensor on an Acura TL you will first need to make sure that the vehicle is parked on level ground and turned off. Loosen the lug nuts which hold the tire on that you wish to change the ABS sensor in. Jack up the wheel making sure you place a jack stand under the frame securely and continue to remove the wheel. Unplug the ABS electric wiring socket that you wish to replace. Use a socket to remove retaining bolts through the wheel hub assembly. Remove the wheel hub and you will find the ABS sensor behind this area. Remove the mounting bolts that hold the ABS sensor in place. Put the new ABS sensor in place and secure it with the mounting bolts. Reattach the wheel assembly hub and make sure it is secured in place. Plug the ABS wiring harness in. Replace the wheel and fasten it securely with the lug nuts.
Need to know what year
where are the abs inop
Most likely wheel speed sensor problem - either broken wire or a problem with the sensor/hub. To find out which one, you need to read the ABS codes.
The speed sensor may be built into the hub bearing. In that case the whole hub bearing needs to be replaced.