answersLogoWhite

0

Assuming here your primary sanitizer is chlorine, you need to shock a pool at least once a week, maybe more often in very warm climates. It is normally 1 lb per 10,000 gallons. The best shock or oxidizer is 78% calcium hypochlorite. You can get this at any professional pool store that sales the brand Poolife. They are the only one that carries it. There are also other percentages out there, 73%, 68%, 62%, 54%, and 47%. Just pay attention to the ingredients and the concentraton of the cal hypo. The higher the %, the better the product. If you choose to use the lesser concentration, you are going to need almost double what you would use if higher concentration. Its actually more cost effective to purchase the higher concentration.

AnswerThe amount of shock depends on how big your pool is. You can determine this by reading the back of the chemical package. I usually shock the pool once a week, but keep chlorine tabs in the float. Answerif you use slow dissolving tabs normally you want to shock about once a week. check bottle for dosage
User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

Do you shock a pool or backwash pool first?

Backwash first then shock. If you shock and then backwash you will be throwing away the shock you just put.


How many cups of pool shock in one pound?

It depends on the type and concentration of the pool shock. In general, 1 pound of pool shock can treat about 10,000 to 15,000 gallons of water in a swimming pool. You should always refer to the specific product label for instructions on how much to use.


How do you shock an intex pool?

3800 gals of pool water shock it with 1 gal bleach


How much shock do you use for a 24ft pool with a chlorine lock?

Three to four times the normal rate


When using an ionizer how often should you shock the pool?

The length of time between pool shocks varies. It depends on factors such as how often the pool is used, how many people use the pool and other factors. It is best to have a test kit to check the chlorine level and the pH balance to decide how often to add chlorine or to shock the pool.


Does pool shock contain chlorine?

Yes, pool shock typically contains chlorine as the active ingredient to sanitize and disinfect the pool water.


How many cups are in a pound of pool shock treatment?

The number of cups in a pound of pool shock treatment varies depending on the density of the product. On average, there are approximately 2 to 2.5 cups of pool shock treatment in a pound. It is recommended to check the packaging or product label for specific instructions on measuring.


Is pool shock the same as chlorine?

Pool shock typically contains a higher concentration of chlorine compared to regular pool chlorine products. Pool shock is used to quickly raise the chlorine levels in the water to kill bacteria and algae, while regular pool chlorine is used for maintenance and to keep the chlorine levels stable over time.


How to use pool shock effectively for maintaining clean and clear water in your pool?

To use pool shock effectively for maintaining clean and clear water in your pool, follow these steps: Test the water: Use a pool water testing kit to check the chlorine and pH levels in your pool. Calculate the amount of shock needed: Refer to the instructions on the pool shock product for the correct dosage based on your pool size and current water conditions. Dilute the shock: Dissolve the pool shock granules in a bucket of water before adding it to the pool. This helps prevent staining or damage to the pool surface. Apply the shock: Pour the diluted shock solution around the perimeter of the pool while the filtration system is running. This ensures even distribution of the shock throughout the water. Wait and test: Allow the shock to circulate in the pool for several hours or as recommended on the product instructions. Test the water again to ensure the chlorine and pH levels are within the desired range. Repeat if necessary: If the water is still cloudy or algae persists, you may need to shock the pool again or consult a professional for further advice. By following these steps, you can effectively use pool shock to maintain clean and clear water in your pool.


Do you remove your pool sweeper when you shock the pool?

You do not need to remove it.


What is shock a pool?

To shock a pool is to effectively increase the chlorine dosage to the max in order to exterminate a bacterial or algae problem.


Is pool stabilizer and shock the same?

No, pool shock is normally a really strong chlorine and stabilizer is like sunscreen for the chlorine