answersLogoWhite

0

Three to four times the normal rate

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

How much shock do you use for a 5000 gal with a chlorine lock?

For a 5,000-gallon pool experiencing a chlorine lock, you typically need to add about 1 pound of shock (calcium hypochlorite or sodium dichlor) for every 10,000 gallons of water. Therefore, for a 5,000-gallon pool, you would use approximately 0.5 pounds of shock. It's essential to check the chlorine levels with a test kit before and after shocking to ensure proper balance and effectiveness. Additionally, consider addressing any underlying issues contributing to the chlorine lock.


What if you have too much combined chlorine?

If you have too much combined chlorine in your pool, it can lead to eye and skin irritation, as well as create an unpleasant smell. To reduce combined chlorine levels, you can shock your pool with a chlorine shock treatment, which will break down the combined chlorine compounds and free up the chlorine to sanitize the water effectively. Regularly maintaining proper chlorine levels and practicing good pool hygiene can help prevent the buildup of combined chlorine.


How much chlorine do you put in a15foot by 3foot pool?

I'm assuming 15 round? Not much, start with 4 ounces of granular per week, monitor levels to see where total and free is at. Make sure to shock weekly, too. A chlorine based shock is your chlorine levels need to be raised, or a non-chlorine oxidizer if your chlorine levels are above 5 ppm.


How much chlorine do you use in a 6000 gal pool to shock it?

better to get a bag of shock rather then guess and do it yourself local pool supply should have it


How much is 8 yards equal to in feet?

24ft


How do you convert a Bacqucil pool to chlorine?

It,s easy. Just Shock your pool with a chlorine shock and then make sure the chlorine level is where you need it to be. It, more involved if you go from Chlorine to Bacqucil. but why would you want to Bacqucil is so much nicer and easier.


How much does a 1988 24ft sea ray sierra weigh?

6000


How much chlorine do I add to kill algae?

The amount of chlorine needed to kill algae in a pool depends on the severity of the algae bloom and the size of the pool. It is recommended to shock the pool with a higher dose of chlorine than usual, following the manufacturer's instructions on the product packaging. Additionally, consider using an algaecide in conjunction with the chlorine for more effective treatment.


What to do when there is Way to much chlorine in your pool?

If there is too much chlorine in your pool, you can first test the water to confirm the high levels. To reduce the chlorine level, you can aerate the water by running the pool pump and opening the pool cover to let sunlight break down the chlorine. You can also partially drain the pool and refill it with fresh water to dilute the chlorine concentration.


If after shocking with chlorine shock and still doesnt register on strips is pool safe to swim in?

Be careful when testing for chlorine. No chlorine will have a clear reading but too much chlorine will cause bleaching of the test reagent confusing you to think you have no chlorine in the pool, try doing a dilution test where you dilute half pool water and half tap water, If coloured results appear with dilution you know you have too much chlorine. Swimming with too much chlorine can cause skin rashes irritations, discolouring of swim wear rotting the stitches, and blacken jewellry.


How much chlorine is needed to shock a 30000 gallon pool?

The amount of chlorine shock always depend on how much you want to raise your cholrine level for and the total amount of water in your pool. I was told by pool experts that the amount is 2.5 gals per 16,000gals or 1.5 gals per 10,000gals, once a week. During the summer, make sure you shock every 7 days, after sundown, when all swimmers are done. Shocking at night keeps the chlorine in the water longer.


How much chlorine granules for 2529 gallons of water?

one pound of cal hypo, granule chlorine, will treat 10,000 gallons of pool water. So use 1/4 pound to shock, two or three times that if pool goes green. If pool has a vinyl liner use sodium hypochloride, liquid shock, instead of granules.