0
Your question is too broad.
Here's my answer.
WIRES.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How can measure the gain of an antenna?
ratio of transmitted power and received power
IF transmitted power is increased by 16 than range is increased by a?
R is proportional to 1/4th power of transmitted power so answer is 2
What is continuous wave power?
In communications, a continuous frequency voltage or electromagnetic wave capable of being modulated or impressed with a second signal which carries the information to is transmitted.
How electricity is transmitted to andaman?
No electricity is transmitted to Andaman from mainland.In fact it is generated at each island with the help of diesel generators according to need of the particular island.However, power is transmitted from Kalpong hydro electric project(North Andaman) to middle andamanwith transmission lines of 33 KV.
What are the advantages and disadvantages of binary phase shift keying?
One advantage is more bandwidth. A disadvantage is that the transmitted power is lower.
Is a 01 Jeep Wrangler front drive shaft always spinning?
In 2wd it will free wheel while driving. There is no power being transmitted through it though.In 2wd it will free wheel while driving. There is no power being transmitted through it though.
What is the power range of BTS?
GSM900 transmitted power from BTS: 39dBm GSM1800 transmitted power from BTS: 36dBm
The total power content of an AM signal is 1000W Determine the power being transmitted at the carrier frequency and at each of the sidebands when the percent modulation is 100 percent?
In Double Sideband AM (DSB-AM) modulation, two thirds of the power is consumed by the carrier, so 667W would be transmitted at the carrier frequency. The remaining 333W is split equally between the two sidebands, each being mirror images of each other.
How can measure the gain of an antenna?
ratio of transmitted power and received power
IF transmitted power is increased by 16 than range is increased by a?
R is proportional to 1/4th power of transmitted power so answer is 2
What the AM transmitted power equation?
Total Power = Power of unmodulated carrier + 2 * Power per sideband
How is energy lost whilst electricity is being transmitted?
Power lines have a certain amount of resistance which results in a conversion of some electricity to waste heat.
What percentage of the power generated is lost when it is transmitted from the power plant to your home?
50%
What is continuous wave power?
In communications, a continuous frequency voltage or electromagnetic wave capable of being modulated or impressed with a second signal which carries the information to is transmitted.
What technology is used when power is transmitted on a network cable?
Power over ethernet (PoE)
Why is electric current produced by power plants is transmitted as alternating current?
Because AC allows the power to be transmitted over distance at high voltage and then transformed down for the users.
In solar power plants the power is directly transmitted through converter or firstly it is stored in a battery and transferred through converter?
In solar power plants, the power is directly transmitted through converter but excess power is usually stored in a battery and transferred through converter.
