can change a direction of a force
pulley
Fixed Pulley!!
It decreases the force.
do not know probally no one does SOMEONE help
he made the pulley because he wanted to help people out so they dont have to carry all of the heavy stuff.
When the pulley moves with the object, it is known as a moving pulley system. In this setup, the pulley acts as a wheel that is also being pulled along with the load, which can help to reduce friction and make it easier to lift the object. This configuration is often used in various mechanical systems to help distribute weight and facilitate movement.
An example of a fixed pulley is a flagpole. The pulley is attached to the top of the pole, and the rope passes through it to help raise and lower the flag. The pulley remains stationary as the flag is moved up and down by pulling on the rope.
Loosen the 17mm bolt in the middle of the pulley. Loosen the belt tensioner, and the pulley should slide off with a little help. Make sure to nothing the little key-way that lines the pulley up.
Not sure what pulley you are referring to, but GM did not put set screws in their pulley. Need more help contact me through my board and I will try to help.
A pulley on a well is used to help lift water or objects from the well. By using a pulley system with a rope and bucket, it makes it easier to raise heavy loads from deep wells by distributing the force needed to lift them.
In most cases you need a pulley puller. Need to know make, model , year and engine to help you more.
That is not a Allen screw in there. That is part of the pump shaft. If you are looking to remove the pump pulley you will need a power steering pulley puller. This tool will help you remove it and replace it, without the puller you will damage the pulley or the pump or both.