Your question has no context and makes no sense.
The answer could be as given by Fredy Kimath although that depends on the definition of an "obsolute angle": a phrase which is not recognised. A circle has no right angle.
There are too many to mention The ones that are exclusive to the harrier are Nozzle angle Water Injection (%) and Nozzle EGT (Exhaust gas temp)
This is determined by the BTU output of your furnace. There is a tag of the furnace normally by the burner assembly that will tell you the BTU. Here is a list of nozzle sizes for BTU. You can get more information on oil furnaces from my book, Forced Hot Air Furnace Troubleshooting and Repair at Amazon: BTU Nozzle size (gallon per hour) 50,000 0.35 55,000 .040 60,000 .045 65,000 .050 70,000 .050 75,000 .055 80,000 .060 85,000 .060 90,000 .065 95,000 .070 100,000 .070 110,000 .080 115,000 .085 120,000 .085 125,000 .090 130,000 .090 135,000 1.0 140,000 1.0 You also need to consider the angle of the cone at the end of the burner assembly.This is the angle of spray for the nozzle. The nozzle will have a marking on it such as 1.0/80 which means 1.0 GPH with an angle of 80 degrees. Be sure to match the nozzle spray angle to your furnace.
It sends hot gases from the combustion chamber to the 1st stage turbine blades at the correct angle and speed
The best technique for using a power wash nozzle to effectively clean outdoor surfaces is to start from a distance and gradually move closer to the surface while keeping the nozzle at a consistent angle. This helps prevent damage and ensures thorough cleaning.
SR nozzle means "Self Reinforced Nozzle".
The answer could depend on what you mean by "intanceous". The word is not recognised and I cannot guess what it was meant to be.
Swirl nozzles inject the liquid in tangentially, and it spirals into the center and then exits through the central hole. Due to the vortexing this causes the spray to come out in a cone shape.Source: Wikipedia searched nozzles. Look under spray nozzle.
0.42
Convergent nozzle indicates nozzles will converge with an end closing together at the end divergent nozzles increase size at the end. If air flows in this direction: ---> Convergent nozzle > Divergent nozzle <
The Wedco Nozzle is a CARB compliant spill-proof gas can nozzle. With the nozzle in place you can invert your gas can and it will not leak. Then simply push the nozzle lock and push the nozzle against the rim of the filling throat of the tank you're filling to start the flow of fuel. If you lift the nozzle away from the rim the flow stops.
You get the rocket nozzle after you open the rocket nozzle box in the level with the blooper boss.