Want this question answered?
Do you mean the side marker light next to the headlight? Open the hood. On top of the headlight assembly, there's a screw with a Phillip-head pattern, next to the marker light. Remove the screw. Pull the marker light forward to remove it.
On my 2002 Nissan Xterra I had to remove 4 screws from the front bumper and wheel well and then I was able to get to the back side of the side marker light and remove the nut in order to get to the light bulb.
carefully remove fender and the marker light should be clipped in . just squeeze the the clips to remove the light
Remove the connector from the back of your marker light assembly. The lightbulb can be removed by pushing it in and turning at the same time. Reverse the process to install your new side marker lightbulb.
On my 2002 Nissan Xterra I had to remove 4 screws from the front bumper and wheel well and then I was able to get to the back side of the side marker light and remove the nut in order to get to the light bulb.
I took a few screws out of the front wheel well mud guard behind the marker light and reached in through there to remove and replace the side marker light.
There's a Phillips screw at the top of the marker light. You would need to unscrew that and then you will be able to remove the side marker light from your Toyota 4Runner. We have also included a link to a video in the related links section below.
On my 99 you remove the headlight assembly by removing the two plastic covered wing nuts, then remove the side marker/blinker assembly by removing the plastic covered wing bolt, then the light is accessible. It sounds harder than it is!
You need to take of the tire and remove the inner black lining in the wheel well, or at least remove enough screws so that you can get your hand in there. Once you have done that simply push out the marker and replace the light.
first u pour gasoline on it then take a match and light it on fire.
3 10mm bolts hold on the headlight assembly. Remove bolts and lift assembly slightly from the bottom to release it. Pull assembly forward. Twist marker light holder to remove it. Bulb pulls out. Reverse for installation.
Carefully remove the lens then bulb