You're pretty much going to have to replace it. You'll have to get your refrigerant recovered and stored by a shop, then you'll have to remove the thermal expansion valve and replace that, then you're going to have to replace your receiver-drier, as well - and you'll want to make sure you have a vacuum pulled before you unseal that as you attach it to the AC system, or it'll be pointless to replace it.
where is the expansion valve located
It is attached to the back wall of evaporator. You have to remove the glove compartment, blower unit and evaporator to get access to the expansion valve.
Located on the lower tube of the condensor, behind the grill on the passenger side.
The name of the plastic piece that holds the lines to the expansion valve in a 1995 Toyota Camry is called a clam shell ventilator. As of 2013, the clam shell ventilator can be purchased for around $10, plus tax and shipping.
Mars Odyssey - 1995 was released on: USA: 1 June 1995
you have to remove the clove box and glove box frame and then remove the evap. Its attached to it.
1995 nissan pickup has a expansion valve rather than a orfice tube and is located on the evap.
You have to remove the blower motor and housing . Also remove glove box to see what you are doing. Re move the side cover on the evaporator and unbolt evaporator on engine side 2 bolts then pull out evaporator and expansion valve together
complete instructions in a vehicle spacific repair manual at most parts stores
The AC receiver drier on a 1995 Honda Civic is on the high-pressure side of the system. It is between the expansion valve inlet and condenser outlet.
Honda Odyssey - international - was created in 1995.
The expansion valve, will be in the AC unit on the Passenger side of your truck, right behind the glove box. First remove the glove box, and the the screws on the perimeter of the ac box as well as in front, it should open up, and it will be at the top right front of the box.