you dont you get a new car
If you grab the light and pull it straight twards yourself it will come off. The bulb is in there
To replace the HID bulb and ballast on a 2001 Lexus ES300, first, disconnect the negative battery terminal to ensure safety. Remove the headlight assembly by unscrewing the bolts and gently pulling it out. Once the assembly is accessible, unplug the old ballast and bulb; then, install the new ballast and bulb, ensuring they are securely connected. Finally, reassemble the headlight assembly, reconnect the battery, and test the new components.
I recently had to replace the trunk light in my '97 ES300. If you just need the bulb, it's NOT replacement #194 that Walmart, Advanced Auto and others list. You need a 12V, 3 Watt bulb that looks like a fuse. I finally had to buy mine from our local Lexus dealer. Pop open the light cover with a screwdriver and carefully pull out the bulb. Try this first because it's probably only the bulb that is bad.
To change brake light bulbs on a 1998 Lexus ES300, open the trunk lid. Locate the plastic rivet on the side of the trunk liner. Turn the rivet while pushing in with a screwdriver. Remove the rivet and the trunk liner can be pulled away to access the bulb. Push in and turn the bulb to remove. Insert the new bulb the same way. Replace the rivet in the trunk liner.
If I remember correctly, there is a rubber cover on the back side of the headlight assembly (under the hood). Once that is pulled back, there is a a wire clip that holds the bulb in place. Once the wire clip is dis-engaged, the bulb will slide out of the socket/holder.
To replace the ABS bulb in the dashboard of a 1998 Volvo S70, first, disconnect the car battery to ensure safety. Remove the dashboard panel by unscrewing any screws and gently prying it off. Locate the ABS bulb holder on the back of the dashboard, twist it counterclockwise to remove the old bulb, and insert the new bulb. Finally, reassemble the dashboard and reconnect the battery.
remove bulb from in side the boot
Along the rear of the inside of the trunk there are four small bolts which need to be removed. Once removed, you will be able to push out the outer plastic cover holdind the light bulbs and wiring. From there, you can easily remove and replace the bulbs.
Easy just pull out the top unit latches to it with 4 inserts.and replace bulb
1998 Lexus ES300 turn signal light bulb replacement: Purchase the correct replacement turn signal light bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the turn signal light bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
To replace or repair a dashboard bulb in a 2006 Toyota Matrix, start by disconnecting the negative battery terminal for safety. Remove the dashboard cover by unscrewing any screws and gently prying it off. Locate the burnt-out bulb in the instrument cluster, twist it counterclockwise to remove, and replace it with a new bulb of the same type. Reassemble the dashboard by reversing the removal process and reconnect the battery.