The 1997 Honda Odyssey has the most common hook-end wiper arms on both front and rear. See the Sources and Related Links section below for installation videos. Also, purchase the replacement blades first and there will be additional instructions/illustrations on the replacement packages. Locate and press the tab or button where the wiper blade is inserted into the hook of the wiper arm and pull wiper blade out of hook. You may have to rotate and flex the blade to make enough clearance for the hook to pass through.
honda crv 1997 rear wiper blade should be 11", 13" is too big
To remove the wiper blade from a Honda Jazz, first lift the wiper arm away from the windshield until it is in a vertical position. Locate the small tab or clip on the wiper blade where it connects to the wiper arm and press or pull it to release the blade. Slide the blade downward off the arm, and then you can replace it with a new blade if needed. Always refer to the vehicle's manual for specific instructions related to your model year.
The 2009 Honda CRV rear wiper blade size is a special 14" rear wiper blade that is very simple to replace once you find a replacement. Unfortunately, most stores do not stock this special rear wiper blade so please see sources and related links below for more information and installation videos. Once you get the wiper blade, there will also be step-by-step instructions on the packaging.
To change the wiper inserts on a Honda Fit, first lift the wiper arm away from the windshield. Then, locate the small tab on the wiper blade where it connects to the arm and press it to release the blade. Slide the old insert out and replace it with the new one, ensuring it's securely in place. Finally, reattach the wiper blade to the arm and gently lower it back onto the windshield.
The wiper blade for a 1994 Honda Accord is 24 inches on the driver-side. For the passenger side the wiper blade is smaller, at only 20 inches.
You need to get the wiper blade from the dealership. You can just replace the wiper rubber. It slides into the wiper assembly at a cost of about $5, or replace the whole unit for around $50 each. I replaced the rubber part on mine and it's great.
People get terminology mixed up quite a bit so we have to clarify. Do you mean wiper arm or wiper blade? Wiper arm is attached to the spindle near the hood and is rarely removed or replaced. Wiper blade is the wiper frame assembly and rubber blade that is connected to the wiper arm and is changed very regularly. If you just mean the wiper blade (frame and assembly), then you need to get the correct wiper blade at the Honda dealer because aftermarket options are not available. They should also give you installation instructions.
The 2005 Honda Pilot rear wiper blade size is a special 14" rear wiper blade that is very simple to replace once you find a replacement. Unfortunately, most stores do not stock this special rear wiper blade. See the Sources and Related Links section below for more information on the wiper blade itself and installation videos. Once you get the wiper blade, there will also be step-by-step instructions on the packaging. Very easy install.
To replace the wiper blade motor on a Honda Civic Si, first disconnect the negative battery terminal to ensure safety. Remove the wiper arms by loosening the nuts that hold them in place, then carefully lift them off. Next, detach the motor cover and disconnect the wiring harness from the motor. Finally, unbolt the old wiper motor, install the new one, reassemble the components, and reconnect the battery.
Most Honda's have what is called a shepherds crook type mount. Take the wiper blade and rotate it 90� from the arm while you push in the tab mounted on the underside of the blade. Push the blade towards wiper arm gently. It should slide about 2" and then you can pull it out and around the 'crook' part of the wiper arm. If you can't do this, any auto parts store can help you out. usually for free.
The 2008 Honda CR-V takes a fairly specialized 14" rear wiper blade that is often difficult to find in stock at stores. See sources and related links below for more information on the wiper blade itself. Installation is simple once you have the correct fitting wiper blade.
It is easiest to replace the back wiper blade by carefully prying off the cap at the bottom of the wiper and then remove the whole wiper arm. After that you will be able to easily replace the wiper blade per the instructions given by the wiper blade manufacturer. Once you have done that, simply reattach the arm and snap the cap back in place. This process will take you less than five minutes.