you will need to plug in an obd diagnostic scanner to read the fault codes then clear them which will turn off the light
To reset the service indicator Citroen C3, push the button on the instrument panel. Hold it for 10 seconds while turning on the ignition.
get a engineer genius I know
it means you need a new coil pack
You press and hold down the trip reset and then turn on the ignition. The LCD odometer display then counts down and when gets to zero the service reminder has been reset. This also works on a Picasso.
The check engine light is reset with a scan tool after repairing the cause of the fault.The check engine light is reset with a scan tool after repairing the cause of the fault.
I doubt if it can be reset. Probably a sensor fault if it is reading incorrectly.
The ABS light is on because there is a fault in the system. Once the fault is repaired or fixed the light will reset itself. The ABS system can be scanned for codes to help diagnose the problem.
Press and hold down the trip reset button on the dashboard with the ignition switched off.Turn on the ignition while still pressing the trip reset button till you see zero on the screen. Switch off the ignition and it should reset your service clock.
To reset Citroen C3 immobilizer if the car won't lock or unlock: Unlock driver door manually, get in vehicle and close all doors. Put key in ignition and switch to on position. Hold down the lock button for 10 seconds. Switch ignition off and wait 30 seconds. get out of car and lock.
You can't reset the parking light - It shows you have a fault at that time - Cure the fault and the light will go out - I have a problem with mine - I have an intermittent fault the light only comes on when the parking brake is faulty - most of the time the lights out
There is no reset for the computer. You can disconnect the negative battery cable for 5 minutes and this may or may not reset any fault codes. If not they will have to be reset with an OBD2 scan tool.