Yes, they are both used for power generation
Steam in nuclear power plants is used to drive turbines for generation of kinetic energy.
Steam is often used for power generation. Apply heat to water, steam (pressure) then used to turn a turnbine and generate electricity. Imagine if you boiled water in an encloded pot (air-tight lid). The pressure will build and you can use this pressure to generate power.
Yes Distilled water can be used in nuclear power plants to obtain steam. This steam after spinning the turbines (to turn electric generators for electricity generation) is condensed in a closed circuit and returned back as water to be heated up again and turned to steam.
Water is used to transfer heat from the nuclear fuel in the reactor to the steam generators where it transfers heat to the secondary water to make steam. The steam is then used to turn turbines. Water from an external source is also used to condense the steam from the turbine exhaust, and this water is then returned to the steam generators to continue the cycle.
Steam power provided electrictity and mechanical power
Same way it's used in most other kinds of electrical generation: to turn a turbine. An electric power plant usually involves a generator that is turned by ... something. That something may be wind (wind power), water (hydroelectric dams), or, most commonly, steam. Where the heat to produce the steam comes from is kind of irrelevant to the actual power generation; it can be from burning coal or natural gas, from focusing sunlight, or from nuclear decay.
Steam power must be used on-site.
Nuclear power is used to create large amounts of heat which generate steam. Basically, the steam is then used to spin steam turbines attached to generator sets, which generate power.
steam engine powers are used for the transport application in the early days. Later modified versions of the steam engines are used also for the electrical energy generation.
Steam power is used today as a form of power for many things. Some of these include powering factories and mills.
m/thermal consists of 5X210+1x320 MW capacity that is all steam power generation. so its total installed capacity is 1070 MW.