0
How the heating element use in two phase 415 volts and what rating of element you prefered?
In a two-phase 415-volt system, the heating element typically operates by converting electrical energy into heat through resistance. The rating of the heating element should be chosen based on the required power output and the specific application, commonly ranging from 3 kW to 12 kW for industrial uses. It’s essential to ensure that the element is compatible with the voltage and current ratings to prevent overheating or failure. Additionally, consider the element's material and design to optimize efficiency and longevity.
What else can I help you with?
Can I convert Single phase to three phase for resistance heating?
Single phase can't be turned into 3-phase by any reasonable means. But on the other hand resistance heating is fairly straight forward. If only the fuse rating is high enough it might be possible to rewire a 3-phase heater to run from a single-phase source.
What is the minimum volt rating of wire used in a 3 phase 4160 volt phase to phase system?
5000 volt
Is the kva rating of a three phase generator per phase or a total of the three phases example is a 3 phase 75 kva generator 25 kva per phase or 75 per phase?
The kV.A (not 'kva') rating is the total apparent power of the machine. So a 75 kV.A machine is 25 kV.A per phase.
What does normal phase mean?
The normal phase of an element is: What form it is (liquid ,solid ,gas) what the classification is (nonmetal ,metal ,metalloid)
Can you run a three phase appliance on 240 volt power supply?
No. You need a 3-phase supply that matches the voltage and current rating of your appliance.
Which of the element is sublimes on heating?
One example of an element that sublimes on heating is iodine. When solid iodine is heated, it directly changes into a gas without passing through a liquid phase.
Can I convert Single phase to three phase for resistance heating?
Single phase can't be turned into 3-phase by any reasonable means. But on the other hand resistance heating is fairly straight forward. If only the fuse rating is high enough it might be possible to rewire a 3-phase heater to run from a single-phase source.
How many amps will a 480 volt 3 phase 35 kw heating element draw?
To calculate the current draw of a 480-volt, 3-phase, 35 kW heating element, you can use the formula: [ I = \frac{P}{\sqrt{3} \times V} ] where ( I ) is the current in amps, ( P ) is the power in watts, and ( V ) is the voltage. Substituting the values: [ I = \frac{35000}{\sqrt{3} \times 480} \approx 42.1 , \text{amps} ] Therefore, the heating element will draw approximately 42.1 amps.
What is the normal phase for thr element Hg?
The normal phase for the element Mercury is Liquid.
What if the input power is 208 volts line to line two phase 8 amps to a heating element vs 110 volts 8 amps to a heating element How is watts calculated?
To calculate watts, you need to multiply the voltage (in volts) by the current (in amps). For the 208 volts, 8 amps heating element: Watts = 208 volts * 8 amps = 1664 watts For the 110 volts, 8 amps heating element: Watts = 110 volts * 8 amps = 880 watts
How can you convert the kva rating into kw rating?
kva*cos(phase angle)
On trace heating 415 Volts if you lose a phase on a 3 phase system what percent of heating have you losed?
1/3 rd lost
Was is the normal phase of the element gold?
solid phase
What is the normal phase in the element GOLD?
solid phase
What is the element tugsten normal phase?
The solid phase.
What element has no gas phase?
Helium is an element that has no gas phase. It remains a gas at all temperatures, without undergoing a phase change.
Should an element gain or lose mass on heating?
It depends on the specific element and the conditions of heating. Some elements may undergo chemical reactions that cause them to gain or lose mass when heated. Others may experience changes in phase, such as melting or sublimation, which can also affect their mass.
