Want this question answered?
unscrew speakers cut of connector connect wires to speakers screw speakers in replace cover done
No. You buy a waring harness and connect it to the car wiring and the amp to the speakers there behind the radio.
The speaker wires have 2 pin connectors that connect to the coaxial speakers in the doors.. If looking to upgrade speakers make sure you do research on the physical size of the new speaker as there might be issues. Also you can pick up a wire harness to connect the factory wire harness that is mounted to the door to a new set of speakers.
the speaker wires are on the drivers side under the plastic runner at door they are green and dark green and blue and dark blue
Take the door pannels off of the interior of door, unscrew stock speakers, cut speaker wire, attach new speakers to the wires
No. The radio or amp would be fused, but not the speakers.
5.25"
AnswerTry to buy ford speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon
Take the door panel off. Match the Wires.
To change the front speakers, you will have to remove the door panels to expose the speakers. Once exposed, unhook them by disconnecting all the wires.
Get some new ones
remove the door panel first. The stock speakers will unscrew from the door frame. Most factory speakers are connected through a "harness" which is a plastic end piece that joins the door wires to the speaker wires. if u are putting in custom speakers, you can order the vehicle specific harnesses through most car audio stores for under $20, just splice the wires and seal with an insulator (electrical tape) and y're in businessou