On what?
How do I replace heater core on 98 Buick lesabre
Remove the water supply lines from your 1990 Ford E3 50 heater core. Remove the heater core retaining bolts. Reverse the process to install your new heater core.
Drain the water from your 1972 Chevy Nova cooling system. Remove the heater core water supply hoses. Remove the heater core retaining bolts.
Dash has to come out to access it. This job is so involved that even vereran mechanics cringe at a heater core removal.
You need to recover the R134 charge, remove the whole dashboard, then remove the a/c heater box to get to the heater core. The heater core should be accessible right next to the gas pedal. No dash removal is necessary.
Replacement of the heater core on a 1993 Mazda Protege is going to first require the removal of the entire dashboard. Once that is removed then the heater control box will need to be removed and disassembled in order to get access to the heater core inside.
When removing and replacing a heater core, it is important to have a diagram. This diagram for the given can be found in its maintenance manual.
The Chevy heater hose removal tool is a plastic piece that clamps around the hose. The tool slides into the fitting to release the hose.
The heater core is located under the dash board, all you have to do is disconect the heater hoses then unbolt the consol and slide it back far enought to be able to unbole the heater core and slide it out. The install is just reversed from removal. Joe
To remove the heater core from a 1979 Pontiac Trans Am, first disconnect the battery and drain the coolant from the radiator. Then, remove the dashboard and HVAC housing to access the heater core. Disconnect the heater core hoses from the engine compartment, and finally, unbolt the heater core from its housing and remove it. Reinstallation is the reverse of removal, ensuring all seals and connections are secure.
the heater core is between the driver and passenger in the middle of the floorboard there should be a plastic cover with some screws then a bracket holdt the heater core in place,remove the hoses from under the car to complete removal,fairly simple to do!
To change the heater core in a 1998 Ford Ranger, first ensure the engine is cool and disconnect the battery. Remove the dashboard components to access the heater core, which typically involves removing the center console and the dashboard itself. Disconnect the heater hoses from the old heater core, remove the mounting screws, and take out the old core. Install the new heater core by reversing the removal process, reconnect the hoses, and reassemble the dashboard.