0
Add your answer:
Earn +20 pts
Any ideas why the Lighter socket doesn't work in Honda Civic EX 1998 when the car is turned ON and fuse is OK?
1998 honda civic ex cigarette lighter
An suggestions on what I need to check if my GPS won't charge through the cigaretter lighter socket in my 1998 Honda Civic?
Does anything else work in the lighter socket? You might have blown that fuse. And it is possible that your converter/charger unit is broken.
How do you fix a 1996 Honda Passport cigarette lighter?
you should check the fuse first. you can buy a replacement lighter and socket for about $10 at walmart or auto zone, try just swapping the element first, if that doesn't work you will have to replace the socket also
Honda 300 fourtrax headlight How do you change the bulb?
To change a Honda 300 Fourtrax headlight, first unscrew the lens and remove it, twist the bulb out of the socket, insert a new bulb and then replace the lens.
Is there a cigarette lighter in the Honda 2010 crv lx?
I bought a used Honda CRV LX 4WD. And the cigarette lighter was not in there. I feel there is no cigarette lighter in this model.
Where is the cigarette lighter fuse on a 2005 Honda Accord?
Where Is fuse to cigarette lighter honda accord euro,and No of fuse in box
What size socket to remove plugs from 750 Honda ace motorcycle?
You will need a 5/8 socket to remove the plugs from your 750 Honda motorcycle. A deep well socket is recommended.
What size socket is used to change spark plugs on a 98 Honda CRV?
Probably 5/8" or 18mm But the socket won't fit down the hole for the plug. I tried a 13mm thin wall socket. It doesn't fit!
What is the proper size socket for a spindle nut on a 1995 Honda civic dx?
32mm socket
Where is the cigarette lighter for the 2007 Honda Odyssey?
they don have
What is the spark plug socket size for an 2007 Honda shadow spirit 1100?
18mm thin wall socket normal socket will not work
How do you change front signal light bulb on 1999 Honda CRV?
To change the front signal light bulb on the 1999 Honda CRV, pry up the fender fastener to expose the bulb socket. Twist the bulb socket 90 degrees and remove from the assembly. Turn the burnt bulb counterclockwise and pull out. Replace with new bulb.
