Build a dependent current source in the operating range of the diode in question. The 1N4148 (1N914), for instance, is a 75ma diode. I would build a current source capable of 0 to 50ma. Plot voltage versus current and then replot current versus voltage. Be prepared to plot on log-log or semi-log paper, in order to show the true nature of the curve. Also, be prepared to do several runs for several diodes, and also at several temperatures, because there are variations amongst diodes and also as a result of temperature.
For most accurate reporting, you should measure the diode's temperature during the test runs, because the higher currents will cause it to warm up and change its curve shape.
This would be a good example for a computer controlled test device. Sounds like a project to me????
the magnetizing curve is the relation b/w air gap flux and the field winding current armature EMF. the resulting curve is called magnetizing characteristics or open circuit characteristics. at any speed by recognizing that the induced emf is directly proportional to the speed
c curve & d curve mcb difference
This is probably the I-V characteristic: Apply a voltage to one terminal of the component, the current through the component is then recorded; this is done for varying values, and is plotted out on a graph. For transistors, this shows where the "linear operation" region is; for diodes, this shows the "turn on" voltage. Such characteristics will be in the data sheets for whatever component you're using.
Generator Capability Curve study
Because the first curves were designed in France!
Is the top portion or bottom portion of the curve of the pipe.
The three characteristics of a supply curve are the slope, shift, and the curve's position. Together they help determine supply and demand trends.
The three major characteristics of an indifference curve are: 1. They are negatively sloped 2. They are convex to the origin 3. Indifference curve cannot be intersected
the middle curve
Below the diode's Forward Voltage (Vf) typically 0.7V, the curve is at (roughly) zero. At around 0.5 it begins to curve upward, and at around 0.7V, the voltage drop is almost constant (the curve heads straight upwards to infinity). See link.
300
A perfectly competitive firm's supply curve is that portion of its marginal cost curve that lies above the minimum of the average variable cost curve.
The modulus of elasticity is the slope of the linear portion of the curve (the elastic region).
The curve moves inward
The curve moves inward
The classic "S" shaped curve that is characteristic of logistic growth.
A verticle demand curve, where a change in price does not effect quantity.