the magnetizing curve is the relation b/w air gap flux and the field winding current armature EMF. the resulting curve is called magnetizing characteristics or open circuit characteristics. at any speed by recognizing that the induced emf is directly proportional to the speed
The theory of converting AC to DC using a 3-phase induction motor and a DC shunt generator involves utilizing the induction motor to mechanically drive the shunt generator. When the induction motor is powered by a three-phase AC supply, it operates and drives the rotor of the connected DC shunt generator. This generator then converts the mechanical energy into electrical energy, producing a DC output. The process allows for efficient conversion of AC to DC, leveraging the motor's mechanical properties and the generator's electrical characteristics.
to find the relation between emf generated and Field current .....
It does have armature resistance.
swinburne's test on dc shunt machine is to predetermine the efficiency of the dc machine , but it is not accurate it is just like estimation of efficiency of dc shunt machine when it is run as a motor and a generator............................
A shunt generator is a type of DC generator that does not use a permanent magnet. Reducing the speed of the generator will reduce the output, but not the load the generator requires because the currents in the parallel branches are independent.
load test on dc shunt generator is a test to plot the internal and external characteristics of the generator.
everything
The open-circuit characheristics and the load characheristics
The difference between a separately excited DC generator and a Shunt DC generator is that for a separately excited Dc generator , the excitation field winding is supplied by an external source different from that supplying the armature while for shunt generator, the excitation field windind is connected in series with the armature and supplied by a single source.
to find the relation between emf generated and Field current .....
It does have armature resistance.
swinburne's test on dc shunt machine is to predetermine the efficiency of the dc machine , but it is not accurate it is just like estimation of efficiency of dc shunt machine when it is run as a motor and a generator............................
A shunt generator is a type of DC generator that does not use a permanent magnet. Reducing the speed of the generator will reduce the output, but not the load the generator requires because the currents in the parallel branches are independent.
in swin burn test we find out the copar loses & iron loses of the dc generator
the direction of the rotation of dc shunt generator could be changed only by changing the direction of rotation of the prime mover
The value of resistance of shunt field winding beyond which the shunt generator fails to build up its voltage is known as " critical resistance at a given speed it is the maximum field resistance with which the shunt generator excite.
By the operation supply 1.AC generator 2.DC generator In DC generator we are having the following types according to the construction 1.DC Series Generator 2.DC shunt Generator 3.DC Compound Generator