remove clutch cover. remove old belt. install new belt.
Belt
im new in ATV a need to install a battery in a polaris scrambler , i have no idea in how to install, help!!!!
To change the drive belt on a 2004 Polaris Sportsman 500, first ensure the ATV is on a flat surface and secure it. Remove the left side panel and then the clutch cover by unscrewing the bolts. Slide off the old belt from the clutch sheaves, making sure to note its orientation. Install the new belt by positioning it on the primary clutch and then on the secondary clutch, reassemble the clutch cover, and replace the side panel.
There are no fuses on a polaris ATV.
To change the drive belt on an Arctic Cat 500 ATV, start by removing the plastic cover over the drive belt to access it. Next, take off the clutch cover and use a belt removal tool or your hands to compress the primary clutch, allowing you to slide the old belt off. Install the new belt by reversing the process, ensuring it is properly seated in both clutches. Finally, reattach the covers and secure them before testing the ATV.
polaris has its own type of transmission fluid. it is called "polaris demand drive fluid" and is available from any polaris dealer
okay this depends on what type of machine your polaris is. if its an ATV, there will be a big shift knob on the left side of the gas tank, and that should be pretty easy to figure out how to use. this is true for every polaris ATV except in the case of the 2000 polaris expedition 425, in wich it was a manual transmission, and you had to manually shift using your feet. in the case of snowmobiles, you do not have to shift them. they use a belt drive system that does everything for you
To replace the drive belt on a 2005 Yamaha Kodiak 450, first, ensure the ATV is on a flat surface and secure it. Remove the seat and side panels for access, then detach the belt cover by unscrewing the bolts. Slide off the old drive belt from the primary and secondary clutch sheaves, and install the new belt, ensuring it fits properly in the grooves. Finally, reassemble the cover and panels, and test the ATV to ensure the belt operates smoothly.
polaris
To change the drive belt on a 2003 Arctic Cat 500cc ATV, first, ensure the ATV is on a flat surface and secure it with a jack or stands. Remove the plastic cover over the clutch by loosening the screws. Then, take off the primary clutch, carefully pulling it apart to access the drive belt. Replace the old belt with the new one, reassemble the clutch, and replace the cover. Make sure everything is tightened properly before testing the ATV.
China.
scrap