Follow the top radiator hose back to the engine. There is where the t-stat housing is. Remove the hose, remove the housing, remove the old t-stat, clean gasket surfaces install the t-stat into the housing with the spring side sticking out toward the engine, use spray adhesive to attach the gasket(DO NOT USE RTV), reinstall everything and be careful to evenly tighten the housing bolts until they are snug(DO NOT RAUNCH HARD ON THE BOLTS). Fill the cooling system with a 50/50 mix of coolant and water, and burp the system.
Wiki User
∙ 2006-05-29 12:26:48how do i install a speed domotor cable on a 1995 f150
In a removable housing at the engine end of the upper radiator hose
located at the upper end of the brake pedal under dash area
The 1995 Ford F150 came with four engine options and five trim levels. The curb weight for the 1995 F150 is 4,196 pounds.
no
There are a few transmission fluids that can be used in a 1995 Ford F150. The most common fluid used would be Mercon ATF,
Yes, Ford made a 402040 bench seat for the 1995 Ford F150 XL model with the in line 6 engine.
how to install alternator2001ford f150
A brake line diagram for a 1995 Ford F150 can be found in a Hayes Repair Manual for that make and year of Ford. This manual is available for around $25 at most automobile parts stores.
Fix the engine
hit it with a hammer....
The ignition control module for a 1995 ford f150 is an important part of the drive train. If the module is failing then the engine will run erratically or not start at all.