0
If you are talking about the tail light the lens is not a separate part of the lamp assy. Replace the complete assy by removing the two screws on the outside and unpluging the lamp socket.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Why you should not reinstall a brake light switch on a 01 dodge ram 1500?
Some brake light switches are only adjustable once.
1997 Dodge 1500 you have a 1997 Dodge 1500 truck the ABS light and the emergency light stay on brake lights don't work though both blubs and fuses are fine?
need to make sure power is getting to the brake light switch and abs unit
What year did dodge start puting brake light on cab of 1500 quad cab pickup?
The "3rd" brake light has been out since at least 1994.
Do you have to remove the parking brake to get the rear rotor off on a 2003 dodge ram 1500?
You may have to loosen the parking brake shoe adjuster.
The parking brake pedal on my 2001 dodge ram 1500 is stuck to the floor. How do I fix it.?
If the parking brake pedal on your 2001 Dodge Ram 1500 is stuck to the floor, you might have broken the parking brake cable. Remove the rear tires to see if the cable is still attached and replace it as needed.
1997 dodge 1500 pickup abs light and brake light stay on after emergency brake is released?
The ABS computer has detected an electrical or mechanical malfunction. You need to have it checked for codes.
What is the location of the stop light switch on a 1997 dodge 1500 4x4 ext cab?
It is on a bracket above the brake pedal. It reads off of the brake pedal.
What would cause the brake lights to go out on a 1998 Dodge RAM van 1500?
normal wear and tear. Brake light switch, bulbs or sockets.
What size socket to remove bolts on the calipers when replacing brake pads on a 1997 Dodge Ram 1500?
3/8 inch Allen
What type of brake booster on dodge ram 1500?
Vacuum
How do get the turning light bulb out of a 2001 Dodge 1500 truck to replace it?
Remove the ligth assy and unscrew it from the rear.
How do you remove rear brake rotors on 2002 1500 dodge ram?
Remove wheelsRemove caliper mounting boltsSilide caliper off rotorRotor should slide of hub assembly
