0
What else can I help you with?
How do you replace the calipers on a 1999 Dodge Ram?
FIRST, YOU REMOVE THE TIRES THEN YOU GET EITHER 3/8 OR 10 MILLIMETER HEX SOCKET TO REMOVE THE CALIPER. REMOVE THE BRAKE LINES AND PULL HER OFF. INSTALLATION IS REVERSE
Remove lighter socket from 2013 dodge durango console?
how to remove lighter socket from 2013 dodge durango console
What size Allen wrench is used to remove the calipers on a 1999 Dodge Dakota?
Its not an Allen wrench its a specialty socket. Go to like autozone or a place like that. i got mine at carquest in las Vegas.
Remove the rear brake calipers on a 2009 Dodge Journey?
To remove the rear brake calipers on a 2009 Dodge Journey, start by safely lifting the vehicle and removing the rear wheels. Next, locate the caliper mounting bolts on the back of the caliper and use a socket wrench to remove them. Carefully slide the caliper off the brake rotor, supporting it to avoid putting stress on the brake line. Finally, secure the caliper with a bungee cord or similar to prevent it from hanging by the brake line while you work.
What size socket do you need to remove the thermostat from a dodge grand caravan 2000?
That depends on the engine. I believe that the 2.4L needs a 10mm socket, the 3.0L uses a 12mm, and the 3.3L/3.8L use a 13mm socket to remove the housing bolts.
How do you remove a cigarette lighter socket in 2006 dodge stratus?
To remove the cigarette lighter socket in a 2006 Dodge Stratus, first, disconnect the negative battery cable to ensure safety. Then, use a flathead screwdriver to carefully pry off the trim surrounding the lighter. After removing the trim, you can access the socket and disconnect the wiring harness attached to it. Finally, unscrew the socket from its mounting and pull it out.
What size socket is needed to remove the rear hub bearing nut on a 2000 dodge stratus?
30mm
Replacing battery on 2005 dodge stratus?
Remove front driver side tire. remove panel in tire well. Battery is in there..
What kind of wrench is needed to remove the front caliper bolts on a 2005 dodge stratus?
7mm hex socket
What is the axle bolt size of a fwd dodge stealth non turbo sohc?
It is a 33mm socket you will me to remove the nut
How do you remove spare tire on Dodge ram without tool?
If you don't have the tool a 13mm socket should work
What size socket used to remove caliper bracket on a 2005 Dodge Magnum?
To remove the caliper bracket on a 2005 Dodge Magnum, you typically need a 13mm socket. It's important to ensure that you're using a socket that fits snugly to avoid rounding the bolts. Additionally, having a ratchet or breaker bar can help provide the necessary torque for removal.
