answersLogoWhite
Ford Ranger
Ford Expedition
Ford Ranger XLT
How To

How to remove front rotors on a 93 fwd ford ranger?

303132

Top Answer
User Avatar
Wiki User
2006-03-01 02:25:34
2006-03-01 02:25:34

u have to take all the lockin hub off and the rotor will about fall off, but u have to take all that stuff off. and u have to replace then inner bearin also, so when u get the rotors make sure u get the inner bearin and race....

1

Related Questions

User Avatar

"http://wiki.answers.com/Q/How_do_you_remove_Front_Rotors_on_a_1994_ford_ranger"

User Avatar

What should the thickness be on the front brake lining for ford ranger 2010

User Avatar

Does anyone know how to remove the chrome part of the front bumper on a Ford Ranger XLT

User Avatar

How do you remove the rotors on a 1992 ford aerostar?"

User Avatar

remove the brake caliper and the rotors come right off

User Avatar

The minimum thickness number should be cast into the rotor.

User Avatar

Jack the front end up of your 1994 Ford F2 50. Remove the tire and wheel. Remove the brake pads and assembly. Tap on the rotors until they are loose. The rotors will slide off. Reverse the process to install the new rotors.

User Avatar

does anyone know of a website to go to for a illustration drawing of the front rotorson a 4x4 1999 ford ranger?

User Avatar

What are the brake rotors minimum thickness on a 1997 Buick Century? Thanking you in advance.

User Avatar

How do your remove the dashboard on a 2000 Ford Ranger?

User Avatar

How do you remove the flywheel on a 1999 ford ranger

User Avatar

Remove the front wheel then remove the 2 caliper bracket bolts behind the rotor and the rotor should slide off.

User Avatar

No there not press on. They are Flowting Rotors. You will need a 3 jaw gear puller to be able to remove them easy.

User Avatar

are there struts or shocks on the front of a 1994 ford ranger 2wd

User Avatar

First loosen lug nuts while vehicle on ground (dont remove all the way). lift front of vehicle remove lugnuts remove caliper mounting bracket 2 bolts, require 15mm socket remove caliper bracket from rotor rotor is ready for removal

User Avatar

Take off the front grill and then remove the housing

User Avatar

to remove the front rotors u must first remove the caliper and caliper frame then remove the nut in the center of rotor rotor should fall off then hope this helps fordtech

User Avatar

i just replaced my rotors on my 97 ranger , they werepitted and warp and could not be turned

User Avatar

Remove the rotors and take them to a machine shop for inspection. If there is not much damage they can be turned.

User Avatar

A 1995 Ford Ranger has shock absorbers on the front and rear

User Avatar

I just replaced mine, rotors had rusted away. Remove caliber, mine were rusted to the wheel hub, had to pry off. cleaned old rust off with steel wool, new rotors slid on with no problem

User Avatar

how do i replace front wheel bearinbs on 2000 ford ranger 4wd

User Avatar

Removing Front & Rear Rotors Well Guys... I remove my Front & Rear Rotors out of my 1998 Ford Expedition XLT. I rented a 3 Jaw Puller from Auto Zone and a bottle of PB Blaster and a sledge hammer it only took about one hour or less to take both off... The way I removed the Front & Rear Rotors was ... 1. I put lots of PB Blaster in the back and the front of the rotors to be removed. 2. I put plenty of tension with the 3 Jaw Puller... 3. I hit the back of the rotor with the sledge hammer... And it came right off... Hope this helps...


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.