# Open the rear cargo door. # Use phillip's head screwdriver to remove 2 screws on side of light assembly. # swing light assembly out away from vehicle. # twist the bulb bracket counterclockwise 1/4 turn. # pull out. # remove bulb. # replace bulb(s). # reverse steps to reinstall light assembly.
you take it apart and fix it
short in electrical circuit
Take off the sopiler four scrows on top, two scrows on each side, then open two scrows on top of the middle break light and pull out the light and twist the blub to left.
How to change light blub in console on a Ford F150.
You need a blub or your brake fluid is low.
open hood, come in from behind blub. twist cover to loosen it, it slides out of the way, down the wires. blub will then come out with a little effort. when you replace bulb do not touch bulb with your fingers. oils damge bulb and it won't last as long
Open tailgate. Look for the two Philips headed screws located in the area typically occupied by the closed tailgate. Remove two Philips head screws. Gently pull the tail light assembly towards you. Rotate blub holders (brake light and tail light). Replace bubls or tail/brake light assembly. Installation is reverse of removal.
blub blub blub blub blub blub blub blub blub blub blub blub blub blub
remove the two pins on the head light . reach down in to the back and there is a clip that you must pull and the whole light will come out . trun the blub counter clockwise and remove the blub by pulling out of the socket insert the new one and that's it
blub blub blub blub blub blub
remove blub housing and replace with correct bulb...read up on specifics.. a manual will help with diagnosis and repair, and a shop manual should be available at the local library in the reference section for FREE, make copies of the right pages, good luck...:)
they make a blub blub noise, you know, like blub blub.