Manual transmissions don't require fluid.
Yes!!! manual transmissions also requires fluid. Drain plug is located under the transmission. It requires a 15/16 wrench. The fill plug is located on the side of the tranny towards the front of the vehicle.
Remove the plug from the bottom of your 2000 Chevy transmission. Allow the transmission to completely drained out. Return the transmission plug to its original position. Fill the transmission with new fluid.
in the valve body in transmission pan
Type your answer here... where is the coolant sensor ona 2001 chevy prizm
Go to your Chevy dealer parts department; they can print a copy for you.
Written in the owners manual and on the drivers door post.
75-90 weight gear oil
To replace the clutch on a 2001 Chevy Prizm, start by disconnecting the negative battery terminal and removing the transmission. This involves supporting the vehicle, removing the wheels, and disconnecting components like the driveshaft, shifter linkage, and any electrical connections. Once the transmission is out, remove the old clutch and pressure plate, clean the flywheel, and install the new clutch kit. Finally, reassemble by reversing the disassembly steps, ensuring all bolts are torqued to specifications.
Yes, I have a 1999 Prism with keyless entry.new answerno, not if they have manual locks.
IMO the answer is yes, as the vast majority of manual transmission 2wd vehicles can be towed wheels down, but as I am not 100% sure on your Prizm, call your local Toyota or Geo dealer for a definitive answer.IMO the answer is yes, as the vast majority of manual transmission 2wd vehicles can be towed wheels down, but as I am not 100% sure on your Prizm, call your local Toyota or Geo dealer for a definitive answer.
Is it manual or automatic ???? Dextron III Mercon = automatic Dextron III Mercon = Manual
To replace the auto transmission shifter on a 1998 Chevy Prizm, first disconnect the negative battery cable for safety. Remove the center console trim by unscrewing any screws and carefully prying it up to access the shifter. Disconnect the shifter cable and any electrical connectors, then unbolt the shifter assembly from the vehicle. Install the new shifter by reversing the removal process, ensuring all connections are secure before reassembling the console and reconnecting the battery.
it would be very unwise to even try,and if you did transmission would burn up