Want this question answered?
remove the gas lines on both ends, be careful not to drop your copper orings unless you are installing a new one. then remove the two bolts that have it mounted to the block. and install the new fuel filter and your done.
Fuel starvation, replace diesel filters first, then check lift pump for proper operation and fuel pressure.Also check for leaks in the fuel lines, and return lines...common problems on diesel engines.
cause you have rubber orings that go on both ends of the injectors you probably need to replace them
Replace them.
follow fuel lines to filter. remove lines from filter and fit lines to new filter.
You will need to drop the gas tank, unhook the fuel lines, and replace the old fuel pump with a new one and hook back up the fuel lines.
Pumping fuel to the injectors is one of the way of telling if the fuel lines are frozen. The remaining fuel that will be unused will be returned back through the return line.
Supply, return, vent.
Two fuel lines, one supply and one return. The third line is a vent line.
separate the lines from the filter and fit the lines onto the new filter. just trace the fuel lines to find the filter
You can not use rubber fuel lines to replace the current brake lines due to the high operating pressure. You will need to replace them with brake lines, the rubber brake lines has a different construction to hold the pressure and not getting eaten away by the brake fluid, brake lines can hold over 2000psi when the pedal is heavily applied
depends on the year, but on the right of the engine there should be about 2 or 3 black hoses going from the fuel filter to the fuel lines next to the intake manifold. the bottom one or 2 hoses are the return lines.