Stepping down AC voltage is accomplished using a transformer. In your case the primary (15kV) to secondary (20v) ratio is 750, which is very high for a typical transformer, so I suspect you would need to step down to some intermediate voltage, and then use a second transformer to step down to 20 volts.
Applied chemistry is simply the application of theories and principles of chemistry to practical purposes. This is a logical step to choose after studying chemistry.
If by 'loss current' (?) you mean the 'copper losses', then there is no practical way of doing so without reducing the load current. Perhaps you should explain what you understand 'loss current', in the context of a step-down transformer, to mean?
Bob Neill has written: 'Step-by-Step Pyrography (Step-By-Step (Guild of Master Craftsman Publications))' 'Practical hypnotherapy'
STEP DOWN is costing:$5.712
Intermediate frequency transformers can be either step-up, step-down, or 1:1. The term "intermediate frequency" relates to the frequency of operation, and not to the voltage or current conversion ratios. An "intermediate frequency transformer" is a special purpose transformer used for filtration purposes in radio reception, rather than voltage or current conversion, though a step-up or step down turns-ratio may be used in the design.
Step Down to Terror was created in 1958.
They asked me to step down off their box.
The past tense is stepped down.
Please clarify what is step down mean ? or did you mean bow down?
A step-up transformer increases voltage, while a step-down transformer decreases voltage.
Current transformers are not voltage transformers. Current transformer are used for metering or protection purposes, with single turn primary. Generally the secondary current is either 1Amps or 5Amps.
No. You can not step up power with a transformer. You can step up voltage, while stepping down current, or you can step up current, while stepping down voltage, but you cannot step up (or down) power.