If you can operate the window from the driver's side, then you need to replace the switch on the passenger's side. If neither side works you need to replace both switches. You buy the switches at any auto parts store. They are fairly cheap. The cover on the window-control panel can be easily removed. If there are no screws, just pry it up.
what year?
On a 2000 Ford Crown Victoria : Bank 1 is the passenger side of the engine , Bank 2 is the drivers side
Bank 1 is the passenger side of the engine on your Ford Crown Victoria
passenger side 3rd from the front
your joking right ?
The firewall is located between the passenger compartment and the engine bay.
Behind the dash on the passenger side.
If it is a older Crown Victoria,( had to replace a window in 89 grand marq.) you have to take off the door panel to get to the window motor and i believe also there are some springs too, and put it on track. Isn't much of a answer you was looking for but it's a start...
need instructions on replacing window regulator
There is not really much to troubleshoot. Either it works or it does not. If the bendix slips and does not engage then you have to replace the starter. The 3rd bolt is very difficult to reach.
it is under the passenger dashboard, the entire dashboard has to be removed.
The passenger side of the engine