in the engine compartment, near the battery.
The service engine or check engine light can be reset with a scan tool or by unhooking the battery. The light will return if the failure that caused the code is not repaired.
locationof backup switch 1997 mustang
Need to know what the question is.
To turn off a service engine light soon on a 1997 Malibu, you will need to unhook the battery for up to 2 minutes. After you hook the battery back up, the light should be off.
Have it checked for codes, That is the same as the check engine light.
The 3.8 liter V6 engine in a 1997 Ford Mustang is rated at : ( 150 horsepower from the factory )
If the service engine soon light is flashing on the 1997 Geo Tracker, you might have a sensor that has been activated because your vehicle is due to be serviced. You could also have a sensor that is malfunctioning.
For the 3.8 liter V6 engine in a 1997 Ford Mustang : With engine oil filter change : ( 4.7 liters of engine oil )
To reset the service engine light on a 1997 Suzuki Sidekick first turn off the car. Unplug the battery of at least 5 seconds and then plug the battery. The computer will now be reset.
I was looking at the 1997 Ford Mustang Owner Guide and it doesn't show a low fuel light in the gauge cluster
The 1997 Ford Mustang uses an electric engine cooling fan . The electric motor and the fan it drives are in a housing attached to the radiator between the engine and the radiator
The 3.8 liter V6 engine in a 1997 Ford Mustang has ( 150 horsepower )
No, it won't.
It means the engine computer has detected a malfunction and set a trouble code.
yes same size engine
The service engien light (check engine) comes on when the engine computer detects a malfunction and sets a code. You need to have the codes read, diagnosed and repaired to keep the light off.The service engien light (check engine) comes on when the engine computer detects a malfunction and sets a code. You need to have the codes read, diagnosed and repaired to keep the light off.
That is the same as a check engine light. See related questions below.That is the same as a check engine light. See related questions below.
I think you take off the + batt.cable for about 15 seconds then reconect. Should be reset... Rick D
This happens when there is an Active Misfire, or a urgent pending service matter. Get your codes checked.
There are pages and pages and items that can cause a check engine light. You need to have it checked for codes with a scan tool. After repair light can be shut off with scan tool.
bottom of engine where belts go
In a 1997 Ford Mustang : No timing belt The 3.8 litre V6 engine has ( 1 timing CHAIN ) The 4.6 litre V8 engine in the Mustang GT has ( 1 timing CHAIN to each cylinder head , so there are 2 timing CHAINS )
According to the 1997 Ford Mustang Owner Guide : ( 5W-30 engine oil is PREFERRED ) * with engine oil filter change , the 3.8 liter V6 engine takes ( 5.0 US. quarts / 4.7 litres of 5W-30 engine oil )