Want this question answered?
how do i change driver side turn signal bulb on 1992 dodge caravan?
The map light on a 2004 Dodge Grand Caravan SXT is changed gently prying the edge of the cover to reveal the bulb. The bulb can then be popped out and a new bulb installed.
cant be done
From outside,take a screws out to get light assembly loose and remove light socket from back of assembly and channge your light bulb,then put it back.
remove tail light, remove burnt bulb, replace burnt bulb, test if it works, then put tail light back on....
Which bulb are you speaking of? The in-dash indicater or your outside turn signal?
To change a front signal bulb on a 98 Toyota open the hood take out a Phillips Head Screw holding a grey bracket on the outside piece that holds the bulb. Slide the whole outside plastic straight ahead, you may have to move it by pushing it forward with a scre driver. Replace bulb.
From the outside of the car.. Just un-screw the two screws and change the bulb.
1998 Grand Caravan headlight bulb replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
Unscrew the light from inside the van and remove the light from the outside
You must remove the 3 bolts on the opper part of the headlight housing and then remove the entire housing. You can then reach the bulb connection
The tail light is an assembly. The lens is not removable. To replace a bulb you remove the assembly by opening the liftgate, removing two fasteners, and pulling the light rearward.