There is not a specific cleanser that you need to use on your sony camera lens. You can use any that is made to clean camera lens' As long as they say that they are camera lens safe and that is what they were made for then you can use it!
To remove a camera lens, first locate the release button or switch on the camera body near the lens. Press or slide this button to release the lens. Then, gently twist the lens counterclockwise to unscrew it from the camera body. Be careful not to force it, as this could damage the lens or camera.
The lens are the first thing that light touches when entering the camera.
It is not recommended to use a different model camera lens on a camera. Camera's and accessories such as camera lens are made by manufacturers to support their own products. Use of an sony camera lens on a differen model camera may void the warranty.
Camera cover and chassis are made up of poly-carbonate compound while shutter and film transport system are manufactured on a separate assembly line. The viewfinder lens can be manufactured similar to the way camera lens is made.
Wikipedia has an article about this model of camera. Made in Japan, this camera was first released in 1982. The Plastic Lens is another website with information about this.
DSLR = Digital Single Lens Reflex It's a digital camera made to look like a 35mm SLR. Usually the lens is interchangeable, but not always. - - - - - It is a camera with a detachable lens for great shots Hope this helped
Monica Seles
No, this is a point & shoot camera and there is no lens mount. The lens is fixed on the camera and cannot be removed.
the first contact lens ever made was made out of glass.
A camera lens is actually made up of many smaller lenses; from one to twelve (or more, depending on the application). A lens element is just one of the many others that is inside the camera lens. Lens Barrel: The complete camera lens that houses the many individual lens elements. It also has the mounting hardware located in the rear, which connects to the camera body.
The filter sits at the end of the lens. All light cannot enter the camera without first going through the lens. And light cannot enter the lens without going through the filter, so the light goes through the fliter, then through the lens, then into the camera