i don know
Incandescent lamps do not require a choke because they operate on the principle of heating a filament to produce light. Unlike fluorescent or LED lamps, which need a ballast or driver to regulate current and voltage, incandescent bulbs draw a relatively stable current directly from the electrical supply. This simplicity allows them to function efficiently without additional components like a choke.
choke is used before drives to reduce the source supply fluctuation problem , which will effect drives
No it will not. If you need increase the supply voltage and remove the choke.
no, the improved modified is between a full choke and a modified choke check out this website http://www.wildfowlmag.com/tips_strategies/shotgun_062304/
Check the chambers.
Check the owner's manual, or check with Mossberg customer service. Unless the choke is rated by the maker for steel shot, not good to do.
check choke operation see ifchoke flap closes on snaping throtle check if choke flap opens slightly on startup if not replace choke pulloff diafragm
It is the problem of Starter or Choke so you should check the starter and the choke. If they are damaged , you have to change these things.
fraud hai
Primer bulbs on small engines take the place of a choke on the carb . If your carb has a choke on it then you could probably bypass it . The object of the primer and the choke is to give the engine a extra charge of gas to help it start when the engine is cold . If you take this away then the engine will be hard starting if it starts at all .
it is a radio frequency choke which connects the dc supply to the circuit but isolate the dc supply from the high frequency oscillations generated in the feedback circuit
Check the power to your automatic choke and check the choke pulloffs. It sounds as if the fast idle cam is not coming all the way off.