Want this question answered?
559 g
Angular velocity (omega) = delta theta / delta time omega = 2 /4 = .5 rev/s = pi radians/s
rolling motion occurs when a round surface (cylinder, wheel, ball) is rotating as it moves in a given direction across a surfaceslipping motion occurs when a round surface (cylinder, wheel, ball) is not rotating but sliding as it moves in a given direction across a surface
The accelerator is one: to increase velocity, push the pedal down, to decrease, lift your foot off. The brake is another, apply the brake and velocity will decrease. also the steering wheel affects it. The gas pedal, the brake pedal, and the steering wheel all do.
You can transform linear velocity into rotational velocity with a rolling wheel. Rotational velocity can be measured inside a gravity field because of generated centrifugal force. When you suspend your arms freely while rotating, the angle between your body and your arm is a measure for the rotational speed.
False.
True.
No. Velocity combines speed and the direction of motion.Constant velocity is constant speed in a straight line.In circular motion, the velocity is always changing even if the speed is constant,because the direction is always changing.
It was 6 radians per second. Angular acceleration = -3 radians per second2 Initial angular velocity = 6 radians per second. Final angular velocity = zero. Average angular velocity = 3 radians per second. Angular displacement in 2 seconds = 3 x 2 = 6 radians.
number of angles moved in 10 seconds divided by 10.
559 g
The angular velocity of a wheel taking 45 seconds to rotate once is 2 2/3 pi radians per minute. The diameter of the wheel does not matter in this case.
18 revolutions = 113.097 radians.
A measure of how fast a rotating body is changing its angular position. The average angular speed (w) is obtained by dividing the http://www.answers.com/topic/angular-distance-2 through which the body rotates by the time taken: w = θ/t, where θ = angular distance, and t = time taken in seconds.
180 rpm = 180/60 = 3 rps Each revolution equates to an angular movement of 2π radians. Therefore angular velocity = 3 x 2π = 6π = 18.85 radians per second (2dp)
The exact angular speed is 5*360 = 1800 degrees per second. The appoximate speed could be 2000 dps
Angular velocity (omega) = delta theta / delta time omega = 2 /4 = .5 rev/s = pi radians/s