0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What are pumps used for on ships?
bilge pump
What type of maintenance should one perform with regards to the bilge of a ship?
A bilge is a part of a ship. A bilge is the lowest compartment on a ship where water tends to collect as it is below the waterline. Bilge maintenance revolves around removing the water that collects in the bilge. This can be done by using buckets and pumps.
What is the water in the bottom of the boat called?
IN larger boats, the area at the very bottom of the boat is called the "bilge", and the water there is sometimes called "bilge water". To get rid of it, sailors use bilge pumps to pump the water over the side and out of the boat. For smaller boats that don't have bilge pumps, the sailors will "bail" the water out by scooping it up with any suitable container, and dumping it overboard.
Why are bilge valves closed after bilges?
there are valves on bilge pumps so that if there are traces of oil in the bilge water, the valves will close so that the oily water will not be discharged overboard. The valves are required to be screw down non-return valved
What do pirates do when the ship starts filling with water?
Man the bilge pumps! (or attack and steal a new ship)
Can bilge pumps short out and pump into the boat?
probably not because of the way the valves are in the pump but it would be funny if that happened
How does a bilge system work?
A bilge system's function is to remove water from the hull of a boat. The systems consist of pumps, motors to run the pumps, piping, and control. The pumps are normally centrifugal type pumps, though any could be used as long as the pressure and flow rate are sufficient to drain the hull. Motors are normally electric driven off of a battery or alternator from the main engine, and can be controlled automatically in the event of an emergency or manually.
What 3 gears that you need for kayaking?
Bilge pumps and bailing sponges, Paddle leashes and floats, Throw rope are the main gears that you need for kayaking.
Where is drain plug Yamaha WR 500F wave runner?
Hi, can not find my plug on hull either, was told they have a bilge pump that pumps it all out.
Are bilge pumps placed underwater?
Yes and no. The pump is placed above water level but it is placed there so that in the event that the water level rises, it will be able to pump it out.
How the crew can know if there is damage in the ship's hulk after some accident or storm when they're still on the sea?
The boat would take on water and the bilge pumps would be running constantly.
What are the type of pumps used for ballast and bilge?
Manual ballast water/bilge pumps are often diaphragm pumps with flapper valves. Large pumps are often positive displacement, centrifugal or moving cavity pumps depending on the amount of crud expected in the ballast.
