Want this question answered?
1. Working fluid : Pneumatics use air, Hydraulics use Oil2. Power : Pneumatic power less than hydraulic power3. Size : P components are smaller than H components4. Leakage : Leaks in hydraulics cause fluid to be sticking around the components. In pneumatics air is leaked into the atmosphere.5. Pneuatics obtain power from an air compressor while hydraulics require a pump6.Air is compressable, hydraulic oil isn'tHydraulic oil is slightly compressable particularly when air is entrained within itHydraulics can also attain power from an air accumulatorPNEUMATIC POWER IS NOT BNECESSARILY LESS THAN HYDRAULIC POWERTHE LOSSES TEND TO BE GREATER IN PNEUMATICS BUT THIS IS DUE TO ENGINEERING RATHER THAN CHARACTERISTICS.Pneumatics are much easier to configure for control applicationsI disagree with answer 3 above, it depends on the application.XDMiss.godgivenhope@hotmail.comPneumatic machines use the power of compressed air to perform work.Hydraulic machines use the incompressibility of water under pressure to perform work.
Mass is the measurement of inertia, or resistance to change in motion. It is not to be confused with weight, a measurement of the force due to gravity exerted on an object. For many practical purposes, mass and weight vary numerically by a constant, namely gravitational acceleration. Due to the common misconception of mass and weight being the same thing, units can often get confusing. For example, the English unit for mass is the slug, rather than the pound (a unit of weight). Some unit systems, such as the American Engineering System, take up the convention of making mass and weight numerically equal. In such a case, the units specify whether mass or weight is intended, so you would have pound mass (lbm) and pound weight (lbw). The SI unit for mass is the kilogram (kg), which, like the pound, is commonly and erroneously used as a unit of both mass and weight.
specific weight of the sheet * area *thickness = weight of the sheet
Shot Capacity : The maximum weight of molten resin that the injection molding machine can push out with one forward stroke of the screw during injection molding operation. Shot weight : The weight of the material injected into the mold in a single shot by an injection molding machine. (Weight of the molded part(s) + Weight of the runner + gate and the sprue)
The torque of a servo is how much weight the servo is rated for. Most of the weight ratings will have two different numbers for the rating, one for dead weight, and one for dragging.
From the specification,I think you are inquiry the weight of pneumatic fenders size 6'×12'. The weight is between 405Kg to 650Kg.There are many manufacturers of pneumatic fender in the world.The weight of fender produce by each manufacturer is different.
a compressor cant lift..
yes the weight can effect a menstal cycle
1.751 tons.
The maximum user weight that this model bike can support is 250 pounds per the manufacturer.
The manufacturer rates the maximum supported weight of the mount as 40 pounds.
This rack is rated by the manufacturer as having a maximum capacity of 400 pounds of weight.
i think .....yes,pressure effect our weight but how i want to know about that
It is really the other way round - gravity has an effect on weight. The more gravity, the more weight.
It strengthens your muscles, helps maintain a healthy weight, helps prevent obesity and keep body systems healthy.
The manufacturer rates the maximum user weight supported as being 400 pounds.
The manufacturer of this elliptical machine rates the maximum supported user weight as 300 pounds.