If the specimen analyzed can be seen. in other words if you look into the eyepiece you don't see black but intead the specimen being focused.
the nosepeice. it may have other names but this is what i know it as.
The objective lenses of a microscope are housed within the nosepiece, which is the rotating turret that holds multiple objective lenses. This allows users to easily switch between different magnification levels while observing a specimen.
The part of the microscope that holds the slide in place is called the stage. The slide is placed on top of the stage, and there are clips to secure it in position while viewing. This allows for the slide to be properly positioned under the objective lens for observation.
To determine the total magnification of a microscope, you need to know the magnification power of the objective lens and the magnification power of the eyepiece (ocular lens). Total magnification is calculated by multiplying these two values together. For example, if the objective lens has a magnification of 40x and the eyepiece is 10x, the total magnification would be 400x.
When talking about the IPO and HPO, it is referring the magnification of a microscope. You can tell the difference of the two, because the LPO is shorter than the HPO.
40 because you have to multiply the ocular lens times the objective lens and the ocular lens is almost always 10x i think. Hopefully it is in your case. I know our microscopes are like that. Hope this helps! :)
Low power objective is like our eye if we want to see we can just see normally but if we want to see something very small but want to see properly at that particular part then we always go for some lens of something powerful. That's the same thing when we want to know something deeply we go for high power microscope to read a more detailed study of a particular part of object under the microscope.
First of all which microscope do you want to know the parts to? A scanning electron microscope? Transition electron microscope? Bright field? Dark field? Phase contrast? Confocal? These parts of found on a bright field light microscope: fine adjustment knob coarse adjustment knob slit light reflected mirror diaphragm objective lens handle stage clips nosepiece revolving nose piece Base arm eyepiece stage bodytube stage
Sometimes, if the stage is set high enough, the objective lens can hit or scratch the slide when it's changed, because each objective lens is a different length. From the back of the microscope, you cannot see if the lens is going to hit the slide or not, and run the risk of disturbing your sample. This problem can be prevented by looking from the side and stopping if it looks like the lens is going to hit the slide. Watching from the side also helps to know if it is too low, or just in the right distance.
sorry but i dont know hmm.... ^,^
I do not know...LOL
the first and foremost thing to know before you can use a microscope is how to use it?