you configure by looking at your rear and you might find the light blinking on your NIC!
Wireless tends to be easier to configure, as running the cables can be a complicated activity. However, wireless is inherently less secure without proper configuration, which many less-technical people overlook when configuring a wireless network.
The first thing to ensure that you are running the NIC on the client at Full Duplex and also ensure that the switch that you are using to connect to the server is running a Gibabit NOC and running 1000SX and not running 100TXUsing your scenario of one server and one computerServer - At least two Gigabit network cards. Team the network cards up so that they act as one.Network - A managed Gigabit switch. Use port aggregation where the server network cards are connected.XP workstation - Gigabit network card.
You first need to have a wireles network running fine. Once that is set up plug your printer into a surge protector and turn it on. Depending on the model you will need to go thru various steps to configure it.
To enable someone else to control your workstation, which is running a Windows operating system.
If your question is novella-length or more, we can't answer it here. I suspect you need to hire a consultant who knows something about Active Directory domain administration.
system services
A wireless network
a. To enable someone else to control your workstation, which is running a Windows operating system
Running 2 wireless modems make cause some interference with your signals.
scp does not need to be configured, but any transmitting part has to have pre-configured ssh server running.
Network+ Guide to Networks answer: To enable someone else to control your workstation, which is running a Windows operating system.
sudo apt-get install squid