Mils = One thousandth of an inch. Refer below web page for further clarification. http://acronyms.thefreedictionary.com/One+Thousandth+of+An+Inch 1 inch = 25.4mm 1 mils = 1 inch / 1000 = 0.001 inch 0.001 inch = 0.001 × 25.4 mm = 0.0254 mm
6 mils * .0254 mm / mil = 0.1524 mm (152.4 µm)
To convert points (pt) to mils, you can use the conversion factor where 1 point is equal to 1/1000 of an inch. Since there are 1000 mils in an inch, you can multiply the number of points by 0.001 to convert to inches and then multiply by 1000 to convert to mils. Therefore, to convert 17pt to mils: 17pt × 0.001 inches/pt × 1000 mils/inch = 17 mils.
1583923.398777 inches. That is true if you are referring to millimetres in which case the abbreviations would be mm. Mils are an angular measurement where a circle is divided into 6400 mils in NATO military usage
To convert mils to circular mils, you simply square the mil measurement. Since one circular mil is defined as the area of a circle with a diameter of one mil, you can use the formula: Circular mils = (mils)². For example, if you have a wire with a diameter of 10 mils, the conversion to circular mils would be 10², resulting in 100 circular mils.
32186,88 mm
There are approximately 39.37 mils in 1 millimeter. A mil is defined as one-thousandth of an inch, and since there are 25.4 millimeters in an inch, you can calculate it by converting millimeters to inches and then to mils. Thus, 1 mm is equivalent to about 39.37 mils.
I don't recognise '1 mils', for one thing it is plural but only one item. Sometimes people talk of 'a mil' meaning a thousandth part. A thousandth of a mm is a micron, but a mm is already a 'mil', ie a thousandth of a meter.
That is the distance between the nozzles and the blades in a turbine, usually about 30 mils. (0.762 mm). Seal clearances on the wheels are often closer at 15 mils (0.381 mm).
305 mm is 1 foot
10 mm IS 1 cm. What is there to convert?
To convert guage to mils, multiply by 0.01 (see related link). 1 gauge equals 0.01 mils
1 MCM means 1000 circular mils, and a circular mil is the area of a circle with diameter 1 mil ( that is 1/1000 of one inch). In metric terms, 1 MCM = 0.5067 sq mm