You need to replace the valve, which will require removing the head. While there, make sure that the valve seats are undamaged, and since it is apart, you are better off replacing all the valves, as well as the valve stem seals. Check the price of valves, as they can get expensive, but most of your cost will be labor.
Try the Fiero Stor online for this
I recomend The Fiero store for this
The Fiero series during mainstream production never had powersteering. If it had continued one more year it would have, it was on the prototype
No the Pontiac Fierodid not come with power steering.No. They did come out with an Electrical power steering unit, but it only came with the 1988 Fiero's. Look into them. Idkif you can put them on any other year but i would like to know to put it on my 86 GT.
That would be a Pontiac fiero Actually its called the T-rex 14r
Would this cause the car not to start If the EGR VALVE is bad
Very carefully - as the newest one would be 22 years old. http://www.mrmikes.com/fieroquestions.htm#headliner
the ignition system would be a HEI or high energy ignition with a distributor cap and rotor. this would refer to the 2.8 liter v6
It looks very similar, but if you parked the two cars side by side you would immediately see the difference.
No. The S-10 is a 5x4 bolt pattern. The Fiero is a 5x100 pattern. Additionally, placing a wheel meant for a truck onto a car would not be a wise idea, as if it's a wheel meant for a truck, you would be placing a wheel onto a car that has different inertia forces and areas of unsprung weight. Source: Fiero owner for ten years.
Yes It would be esiest if yu has a 1985 V6 Fiero car to get parts off This will require a replacement computer and a bunch of custom wiring and shifter work to get running otherwise. Good Luck
You must be from Somewhere in Europe. The first year ofthe Fiero was the 1984 Model year, but in Europe some would be on a 1983 Plate. From personal experiance this car could do a confirmed by Garmin 106 MPH