Add water and stirr: salt is soluble, sand not. Filter the solution. On the filter re- main sand, in the solution salt. After repetitive evaporations you can obtain salt as crystals.
Sand+salt: a heterogeneous mixture.
Salt and sand is a mixture.
Since salt is soluble in water then you have to separate the mixture from sand first and this is done by filtration. The sand will be left in the filter paper and the filtererd solution would be that of salt and water. To get the salt you would then have to heat the solution and the water will evaporate leaving the salt behind.Filter Paper
Yes
Firstly, sift the mixture to separate the gravel from the sand and salt. Now place the sifted mixture into water. The sand will sink to the bottom and the salt will eventually dissolve. Pour this watery mixture through filter paper to catch all of the sand. If you want the salt back in solid form, simply boil the water.
Mixture
To separate a mixture of salt and sand, you can use the method of dissolving the salt in water and then filtering the sand out. If the mixture consists of iron filings instead of salt, you can use a magnet to attract and separate the iron filings from the sand. This method works since iron is magnetic while sand is not.
No, salt and sand do not combine to form a solution. A solution is a homogeneous mixture where the solute (salt) dissolves into the solvent (water) to form a single phase. In the case of salt and sand, they would form a heterogeneous mixture where the components remain separate and can be easily separated by physical means such as filtration.
Put the mixture in water and wait for all of the salt to dissolve. Then filter out the sand and wait for the water to evaporate in the sand/water solution to get the sand and salt separately.
With a magnet
First heat the mixture; the iodine will sublime and turn to a vapor which can be collected. Then add water to the remaining salt/sand mixture; the salt will dissolve but the sand will not. Finally, evaporate the water to obtain the solid salt.
To separate the mixture of sand, salt, and pebbles, you can use a series of physical methods. First, use a sieve to remove the pebbles from the mixture, as they are larger than the sand and salt. Next, add water to the remaining sand and salt mixture; the salt will dissolve while the sand will settle at the bottom. Finally, filter the mixture to separate the sand from the saltwater solution, and then evaporate the water to obtain the salt.