Mix with water, the pass through a filter paper. The salt will be dissolved in the water so it will be removed with the water, leaving the iron filings and gold dust on the filter paper. Leave this to dry then separate off the iron filings using a magnet, leaving behind the gold.
magnet is used to seperate iron dust and sulfur dust mixture
First you can use a magnet to get out the iron filings. Second you could possibly separate the magnesium sulphate from fine sand and zinc powder by using a filter And finally, Magnesium sulphate dissolves in water while zinc powder is insoluble, so you could use that.
Add the mixture of sawdust, sand and salt to water. The sawdust will float and can be skimmed form the surface. The salt will dissolve in the water. The sand can be filtered from the mixture which remains. The salt water solution which remains can be heated and the water will evaporate leaving the salt behind.
Containing dust air is a heterogeneous mixture.
You could sift the mixture through a wire screen sieve which has a mesh small enough to let the sand pass through, leaving the copper on top of the screen.
First, place the sulfur, sand and iron filings in a plastic container. Next, use a magnet to remove the iron filings from the sulfur-sand mixture and surely,the iron filings will connect to the magnet, leaving the sulfur and sand behind.
because magnet has a property that can attract metals/metal particles
magnet is used to seperate iron dust and sulfur dust mixture
Use a magnet.
First remove iron filings with a magnet. That leaves sand, salt and chalk dust. Add water which dissolves the salt, and filter leaving the sand and chalk dust on the filter paper. Put that back in water and add acid to dissolve the chalk dust (CaCO3) leaving the sand as a solid. Filter to obtain the sand. The chalk dust will now be in the acid as CO2 and H2O and the Ca salt of the acid.
First you can use a magnet to get out the iron filings. Second you could possibly separate the magnesium sulphate from fine sand and zinc powder by using a filter And finally, Magnesium sulphate dissolves in water while zinc powder is insoluble, so you could use that.
pour water in the cup, the saw dust flouts up the sand stays at the bottom
Add the mixture of sawdust, sand and salt to water. The sawdust will float and can be skimmed form the surface. The salt will dissolve in the water. The sand can be filtered from the mixture which remains. The salt water solution which remains can be heated and the water will evaporate leaving the salt behind.
I would use a fine meshed sieve.
Magnetism would be the most useful physical property for separating fine saw dust and salt. However, since neither is magnetic, a process of dissolving the salt in water, filtering out the saw dust, and boiling away the water is necessary.
There's no set formula for 'dust'. It depends on what kind of dust it is.
Those would be comets.