In the case of belt drive, following is the procedure.
1) Mount drive pulley on the motor shaft through key or screw.
2) Mount driven pulley on the driven shaft through key or screw.
3) Check axial alignment of the pulleys along a straight line, maintaining slight slackness of one of the pulleys.
4) Mount the belt on one of the pulleys and turn the other slowly to get into the groove.
5) Tighten the pulley which was left loose.
6) Test the drive with an inching motion.
It depends on what is wrong with it, but electric motors can usually be repaired.
what is the average repair cost to fix an electric window switch motor 2003 jeep
Take the door apart and disconnect the seized motor from linkage and tape up window and replace motor.
How to repair electric windows depends on what is wrong with them. If the motor that runs the window has burned out then replace the motor. If the switch is faulty then replace the switch. Check for broken wires, repair them if found.
disconnect the electric harness goop on die electric grease and plug harnesss back on it work ed for me
The fan motor itself is not serviceable. The fuse, relay, and sensor could be bad causing the fan not to run. Check these before changing the motor.
The electric motor changes electric energy into mechanical energy.
If electric then possibly a window switch or motor. If mechanical possibly off track.
An electric motor
Well it usually involves rewinding the stator or rotor. Depending on the motor and what actually failed it's probably cheaper to just buy a new one.
apparently the window motor is bad and will need replaced.
electric energy to mechanical energy