Hown the left side the bleeder boltonthe caliper is broke can you get out?

Answer 1

to remove the broken bleeder. u can use an easyout most times you can get at this without taking calipre completely off car the bleeder already has a hole thru the centre, so all u need is to get correct size easy out the easy out screws into the hole that is already in the bleeder it will screw in backwards(left hand thread) while screwing in, it will cut into bleeder making its own thread when the easyout has good enuff contact the bleeder should screw out as you keep turning you will also need to be careful doing this as easy outs can break fairly easy if not comfortable, take calipre off vehicle and take it to a brake shop . a mechanic there can remove it for you NOTE do not let anyone tell you it cannot be removed you can also drill the hole a little larger before you start and use a larger easy out you will need to remove calipre from vehicle to do this and make sure that you flush out any metal debri from calipre before you reinstall if this works then you just install new bleeder into calipre ,then bleed your brakes