answersLogoWhite

0


Best Answer

Ditch the safety pin. Go on eBay, buy a 14g piercing needle that's been packaged in a pouch and sterilized, and do it in one poke.

User Avatar

Wiki User

14y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: I've got a 14g lip ring and a 16g-14g taper and a 16g safety pin can I do this all at once if so how?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you change your belly button ring?

If it is a captive belly ring you may go to the place you got it peirced and let them take it out for you, or.... you can do what i did, be very careful and take sizzorz gently try to cut the top of the ring near the ball. My flew off. Then steralize the new ring with soap and put it in. Good to go! A piercer will use ring closing pliers. You don't have any. Get a pair of needle-nose pliers and wrap the tips in electrical tape. You will probably also need a taper. First be sure it's healed. If the ring won't turn freely it's not ready to be changed. Use the pliers to spread the ring a bit--put the pliers in the ring and spread them a bit. Set the ball aside. Remove the ring from the piercing. If you have a taper, lubricate it and work it into the piercing. Put the end of the new ring into the taper and pull it gently through the piercing. When the taper's all the way out of your piercing, the ring will be in. Put the ball between the tips of the new ring and squeeze it closed with the pliers. If this new jewelry is a curved barbell, once it's in just screw the ball on.


I have a 0g taper in and I have a plug that the middle is 0g but the outsides a bit bigger I don't want to get a whole new ear ring to put it in is using a padlock safe to stretch it for that?

The reason the outside of the plug you have is bigger is so it stays in place once you get the plug in the lobe. Go see a professional body piercer for some help with the taper, no a pad lock is not OK to use.


When is safety on pistol on?

When you can see the red dot or ring the SAFETY IS OFF.OR If the lever is on the word SAFE the safety is on


How do you put a lip ring back in if the hole is almost closed?

Either push it back in by yourself, or go back to the shop you got it done and have them re-pierce it. You should really evaluate if you want the piercing back in because once its closed, to re-pierce it they use a taper, which hurts a lot. I probably will never let anyone taper me again.


How do you get your nipple ring back in?

If it's been out for and extended period of time you may need to see your body piercer to have them use a taper to put it back in for you.


What health and safety reasons are there for having a boxing ring?

The health and safety reason for having a boxing ring is to prevent the boxers from falling off the platform and injuring themselves or spectators.


How is the bull removed from the ring after it is killed?

The bull is dragged around the ring once and then ragged out of the ring.


Can you change from a 16gauge to a 14gauge belly ring?

Yes but you need to have this done by a professional body piercer who will use and insertion taper to put the new jewellery in the piercing. 14 gauge is thicker than 16 gauge and should be stretched up by use of a taper, forcing the jewellery into the hole will tear the piercing.


Should a ring be worn on the pinky finger?

why shouldn't a ring be worn on a pinky finger? if you like it do it as long as its not a safety risk at work.


Has anyone had problems with losing a d ring on the ski platform on their Malibu boat?

I have a Malibu wakesetter and we lost the D bolt once before because the safety catch came off. Just go to your local Malibu dealer and they can order them in for you


How do you win a ring toss game?

throw it all at once


What are the release dates for I Once Was Lost - 2010 Put a Ring on It 1-5?

I Once Was Lost - 2010 Put a Ring on It 1-5 was released on: USA: 12 July 2010